On Dec 5, 2008, at 11:31 AM, Michael Graves wrote:
On Fri, 05 Dec 2008 10:59:54 -0500, Neil Fusillo wrote:
Michael,
Was there something particularly special you had to do to get your
M3 to
work? I'm now on my second one from E4 Technologies (from whom I'm
still
waiting for a return service call), and both of them, after following
the instructions in the manual, have the same problem.
Neither one will pick up an IP from DHCP. If I set a static IP
with the
handset (which pairs to the base just fine), I can then ping them
when
they boot, but the web configuration service is unavailable (nothing
running on port 80, as if it never gets through the boot process).
Hitting the up volume button on the phone gives me info of an
ff:ff:ff:ff:ff:ff mac accress, no IP (with DHCP) or the static I've
put
in, and a Boot Status of 'Failed'
Was there a trick to getting these running? I've done a factory
reset.
I've tried different cables. Different switches. Now different
handsets
and base stations. Nothing. Same message every time.
Did you run into anything similar, or am I just lucky?
I had no such troubles. Just plugged in and went. What firmware
release
does it have? Mine were v1.22 just the other day when I checked, but I
have it set to D/L the current beta automatically once a day.
Michael
--
Mine automatically updated as soon as it got an IP address. (default
setting)
Fred Posner
[EMAIL PROTECTED]
Main: +1 (212) 937-7844
Direct: +1 (503) 914-0999
www.teamforrest.com
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
