Emmanuel Pascal Bruno wrote: > Has anyone been able to configure portech's mv-378 gateway with asterisk? > > I did the configuration as per the manual but it does not work. > > My server sees the portech gateway, but when the gateway is trying to > register to my server it fails. It says peer is not suppose to register. > > The gateway and the asterisk box are on two different location (two > network, 2 differrent IP address). > > I would appreciate any kind of tutorial or advice on how to make it work. > > Thanks > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Hi, I've an installation working with Portech MV-370. I'm supposing it's quite similar to what you have. If it could be useful to you, this is my sip.conf configuration file. [GSMGtw1] type=friend context=from-gsm host=dynamic ; we have a DHCP assigned address secret=reallyverysecret nat=no ; there is not NAT between phone and Asterisk canreinvite=no dtmfmode=INFO insecure=invite ; required to overcome authentication problems in incoming calls call-limit=1 ; permit only 1 outgoing call at a time disallow=all allow=ulaw allow=alaw allow=gsm qualify=500 I remember that I've found a bug on the firmware that prevents to the unit to register correctly on my asterisk box unless I'm using the raw IP address instead of the name of the asterisk box. I remember something wrong in cryptography chiper/dechiper based on realm... So, if you have problems, let's try to specify the asterisk raw IP address in the Portech. Best regards, Marco Signorini.
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users