Thank you!, I will try that in a few hours and let you know what happens.
On Fri, Jan 16, 2009 at 11:01 AM, Marco Signorini <[email protected]>wrote: > > > Pascal Bruno wrote: > > Thanks for your reply! > > Can you tell me what you have in your Portech configuration settings > (Mobile to Lan Settings; Sip Proxy settings etc...) My sip.conf file is > pretty similar to yours but still cant register. > > > > On Fri, Jan 16, 2009 at 3:47 AM, Marco Signorini <[email protected]>wrote: > >> Emmanuel Pascal Bruno wrote: >> >> Has anyone been able to configure portech's mv-378 gateway with >> asterisk? >> >> I did the configuration as per the manual but it does not work. >> >> My server sees the portech gateway, but when the gateway is trying to >> register to my server it fails. It says peer is not suppose to register. >> >> The gateway and the asterisk box are on two different location (two >> network, 2 differrent IP address). >> >> I would appreciate any kind of tutorial or advice on how to make it work. >> >> Thanks >> >> ------------------------------ >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> Hi, >> I've an installation working with Portech MV-370. I'm supposing it's quite >> similar to what you have. If it could be useful to you, this is my sip.conf >> configuration file. >> >> [GSMGtw1] >> type=friend >> context=from-gsm >> host=dynamic ; we have a DHCP assigned address >> secret=reallyverysecret >> nat=no ; there is not NAT between phone and >> Asterisk >> canreinvite=no >> dtmfmode=INFO >> insecure=invite ; required to overcome authentication >> problems in incoming calls >> call-limit=1 ; permit only 1 outgoing call at a time >> disallow=all >> allow=ulaw >> allow=alaw >> allow=gsm >> qualify=500 >> >> I remember that I've found a bug on the firmware that prevents to the unit >> to register correctly on my asterisk box unless I'm using the raw IP address >> instead of the name of the asterisk box. I remember something wrong in >> cryptography chiper/dechiper based on realm... So, if you have problems, >> let's try to specify the asterisk raw IP address in the Portech. >> >> Best regards, >> Marco Signorini. >> >> >> > Hi, > > I don't know if the problem could be in the Mobile to Lan or Lan to Mobile > settings because these settings are related on how calls coming from/to > mobile are routed. I didn't use the Portech routing features at all because > I need a simple GSM gateway to/from the asterisk box. > For this reason: > 1. The only rule I've on Mobile to Lan is CID=*; [email protected] where > "mob" is the extension I've generated in the asterisk box under the context > where the Portech operates; > 2. The only rule I've on Lan to Mobile is URL=*; Call Num=# > > I think the most relevant parameters for your problem are under the > "Service Domain" menu option (assuming that the firmware you have is similar > to what I've). On this menu I've compiled the 1st Realm (as I've only one > account) like that: > > UserName: GSMGtw1 > RegisterName: GSMGtw1 > RegisterPassword: reallyverysecret > Domain Server: 192.168.0.5 > Proxy Server: 192.168.0.5 > > Pay attention that, having specified the Domain Server with the raw IP > address, asterisk needs to be able to authenticate peers associated to that. > For this reason I've set: > > domain=192.168.0.5 > > on sip.conf [general] section (remember to issue a sip reload from asterisk > cli). > > Hope this helps! > > > Best regards. > Marco Signorini > > > > ======================== > Marco Signorini > INGEGNI Tech S.r.l. > http://www.ingegnitech.com > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
