>To the best of my understanding, latest Asterisk should support it >through chan_dahdi . No need for extra bristuff or whatever. But this >needs some testing.
Any chance I could get some information on how to set it up and use it (keeping in mind that I have limited Asterisk experience and no experience with zaptel or mISDN or BRIstuff)? I have an NT1 BRI here that is up and running and an HFC card and an F9 Linux with *1.6. The BRI can easily be moved to the HFC card for testing. I installed 1.6 from an F9 Yum distro, but I could probably figure out how to download and make the latest from source if necessary. I did the F9 installation and run it, but I'm not real strong on Linux. I mostly do 80186 embedded development in C and assembly. >BRI there behaves very much like PRI. No extra ptmp complications as in the >rest of the >world. I never dealt with PRI, so I can't say for sure, but you are correct that it lacks ptmp, etc. >It seems, though you may need to do some custom wiring. AFAIK, only that it is delivered in U form and some cards (including mine) require S/T, but I already have a converter for that. I am anxious to get my BRI into Asterisk, I just have been overwhelmed at the terse mISDN documentation and haven't jumped in. Having it in dahdi would at least mean one less separate piece to mess with. If I can get some documentation or a bit of handholding, I will take the plunge, report any problems and document the end result (assuming it is successful and worth documenting). Wilton
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
