Have you tried configuring two peer config files and setting the externip parameter in each of them differently to your two public ips?
Dave -----Original Message----- From: bilal ghayyad [mailto:bilmar...@yahoo.com] Sent: Monday, February 02, 2009 2:32 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion'; David Gibbons Subject: RE: [asterisk-users] Sending Calls via SIP trunk from two different IP addresses from same Asterisk Machine My provider has one IP and one port ONLY, I need to send for him the calls from different IP's on the same Asterisk machine, how? Regards Bilal --- On Mon, 2/2/09, David Gibbons <d...@videon-central.com> wrote: > From: David Gibbons <d...@videon-central.com> > Subject: RE: [asterisk-users] Sending Calls via SIP trunk from two different > IP addresses from same Asterisk Machine > To: "'bilmar...@yahoo.com'" <bilmar...@yahoo.com>, "'Asterisk Users Mailing > List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com> > Date: Monday, February 2, 2009, 2:16 PM > If your provider has two different IP addresses at its > endpoint, you could use iproute2 (source based routing) with > two local source addresses to make sure that there is a > one-to-one mapping of source address to destination address. > Then you could have two peer definitions and an > address=declaration in each. As I think about it, I believe > that with iproute2, you could use one provider endpoint > address and two local addresses in the same manner, without > the one-to-one mapping... > > This seems like the most elegant solution in my mind. And > the only one that will work reliably... :) > > --Dave > > <snip> > If that code in the below link worked, will I be able to > have two SIP (IP Trunk), both send for same destination > IP:Port, but from different source IP's? So the > destination will authorize me in my two different IP's? > </snip> _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
