> lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. > > Device 0220 (rev 02) > > dahdi_hardware also: > > astpbx ~ # dahdi_hardware > > pci:0000:03:08.0 wct4xxp+ d161:0220 Wildcard TE220 (4th Gen) > > Fine. The card is indeed handled by the module (+). > > > astpbx ~ # > > But dahdi_tool does not show the card and dahdi_cfg gives > DAHDI_SPANCONFIG > > failed on span 1: Invalid argument (22) > > Next: are you sure that it is configured for E1 and not for T1? What is > the output of: > > cat /proc/dahdi/1 > Please see what's there:
NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16 Found TE2XXP at base address f5100000, remapped to f8d64000 TE2XXP version c01a016a, burst ON Octasic optimized! FALC version: 00000005, Board ID: 09 Reg 0: 0x2b817400 Reg 1: 0x2b817000 Reg 2: 0xffffffff Reg 3: 0x00000000 Reg 4: 0x00000001 Reg 5: 0x00000000 Reg 6: 0xc01a016a Reg 7: 0x90001300 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x0000004a Found a Wildcard: Wildcard TE220 (4th Gen) astpbx dahdi # cat /proc/dahdi/1 Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) astpbx dahdi # astpbx dahdi # ls /proc/dahdi/1 /proc/dahdi/1 astpbx dahdi #
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
