Dave Fullerton wrote: > Hello All, > > I'm trying to connect Asterisk to an Executone phone system with an > analog DID card and I'm hoping someone can help me figure out what I'm > doing wrong. The Executone DID card provides battery to the telco, when > the telco wishes to dial a DID it goes off-hook, waits for a wink from > the Executone and then dials the last three digits on the number with > pulse (as opposed to DTMF) signalling. > > What I've done is purchase an Adit 600 with an FXO card. I've set the > Adit T1 controller to use E&M signalling and the FXO card to use DPT > signalling. I've set asterisk to use E&M in both dahdi/system.conf and > chan_dahdi.conf. > > If I dial the port connected to the DID card it goes off hook but when > the Executone winks Asterisk or the Adit thinks the remote side has hung > up and terminates the call. > > I've tried using E&M wink, featd, and featb signalling in > chan_dahdi.conf, set hanguponpolarityswitch=no, and tried loop start > signalling for the heck of it and that didn't work either. > > Does anyone have any suggestions of additional things I could try? > > Thanks in advance, > > -Dave
Please disregard. Everything works much better when the wires are connected to the correct pair. I had the tip of pair A and the ring from pair B. Thanks anyways. -Dave _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
