Is it possible to set the Executone to NOT wink? Without the wink, a simple FXO port will DP into the switch without problems and without using E&M signaling Even an X100 card could do the job ( at least with earlier Asterisk ) . Am I reading that late Asterisk has mucked up the driver for this old simple card?
John Novack Dave Fullerton wrote: > Hello All, > > I'm trying to connect Asterisk to an Executone phone system with an > analog DID card and I'm hoping someone can help me figure out what I'm > doing wrong. The Executone DID card provides battery to the telco, when > the telco wishes to dial a DID it goes off-hook, waits for a wink from > the Executone and then dials the last three digits on the number with > pulse (as opposed to DTMF) signalling. > > What I've done is purchase an Adit 600 with an FXO card. I've set the > Adit T1 controller to use E&M signalling and the FXO card to use DPT > signalling. I've set asterisk to use E&M in both dahdi/system.conf and > chan_dahdi.conf. > > If I dial the port connected to the DID card it goes off hook but when > the Executone winks Asterisk or the Adit thinks the remote side has hung > up and terminates the call. > > I've tried using E&M wink, featd, and featb signalling in > chan_dahdi.conf, set hanguponpolarityswitch=no, and tried loop start > signalling for the heck of it and that didn't work either. > > Does anyone have any suggestions of additional things I could try? > > Thanks in advance, > > -Dave > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- Dog is my co-pilot _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
