I saw a few posts of this problem before I could not figure out the reason I am getting it.
I am running RHEL 5, Asterisk 1.4.21.2, zaptel 1.4.11 and libpri 1.4.4 Basically, if I dial into a queue and hang up the phone, Asterisk did not detect the hangup request and Asterisk will only hang up when the timer expires. There is no such problem if I do not use Queue(). Any thoughts? Here is my zaptel.conf loadzone=au defaultzone=au span=1,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-21 unused=22-31 dchan=16 span=2,0,0,esf,b8zs fxols=32-55 Here is the log: -- Accepting call from '28835666' to '98857843' on channel 0/2, span 1 -- Executing [98857...@incoming:1] Answer("Zap/2-1", "") in new stack -- Executing [98857...@incoming:2] Goto("Zap/2-1", "ael-queue-office-incoming|s|1") in new stack -- Goto (ael-queue-office-incoming,s,1) -- Executing [...@ael-queue-office-incoming:1] Answer("Zap/2-1", "") in new stack -- Executing [...@ael-queue-office-incoming:2] Set("Zap/2-1", "quv_que_nam=office") in new stack -- Executing [...@ael-queue-office-incoming:3] Wait("Zap/2-1", "2") in new stack -- Executing [...@ael-queue-office-incoming:4] Set("Zap/2-1", "cdv_sts_dbd=2") in new stack -- Executing [...@ael-queue-office-incoming:5] Set("Zap/2-1", "~~EXTEN~~=s") in new stack -- Executing [...@ael-queue-office-incoming:6] Goto("Zap/2-1", "sw-104-2|10") in new stack -- Goto (ael-queue-office-incoming,sw-104-2,10) -- Executing [sw-10...@ael-queue-office-incoming:10] Set("Zap/2-1", "nsv_sts_dbd=2") in new stack -- Executing [sw-10...@ael-queue-office-incoming:11] Set("Zap/2-1", "nsv_div_exs=0") in new stack -- Executing [sw-10...@ael-queue-office-incoming:12] Set("Zap/2-1", "~~EXTEN~~=sw-104-2") in new stack -- Executing [sw-10...@ael-queue-office-incoming:13] Goto("Zap/2-1", "sw-106-2|10") in new stack -- Goto (ael-queue-office-incoming,sw-106-2,10) -- Executing [sw-10...@ael-queue-office-incoming:10] Goto("Zap/2-1", "ael-queue-office-au|s|1") in new stack -- Goto (ael-queue-office-au,s,1) -- Executing [...@ael-queue-office-au:1] SetMusicOnHold("Zap/2-1", "cpwr") in new stack -- Executing [...@ael-queue-office-au:2] GotoIf("Zap/2-1", "1?3:5") in new stack -- Goto (ael-queue-office-au,s,3) -- Executing [...@ael-queue-office-au:3] Queue("Zap/2-1", "office|r") in new stack -- SIP/343-098f5268 is ringing -- Channel 0/2, span 1 got hangup, cause 102 == Spawn extension (ael-queue-office-au, s, 3) exited non-zero on 'Zap/2-1' -- Hungup 'Zap/2-1' _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users