Solution: http://bugs.digium.com/view.php?id=12655&nbn=10
> -----Original Message----- > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Lee, John (Sydney) > Sent: Wednesday, 22 April 2009 3:56 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Queue() Ignore Hangup Request > > I saw a few posts of this problem before I could not figure out the > reason I am getting it. > > I am running RHEL 5, Asterisk 1.4.21.2, zaptel 1.4.11 and libpri 1.4.4 > > Basically, if I dial into a queue and hang up the phone, Asterisk did > not detect the hangup request and Asterisk will only hang up when the > timer expires. > There is no such problem if I do not use Queue(). > > Any thoughts? > > > Here is my zaptel.conf > loadzone=au > defaultzone=au > > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > bchan=17-21 > unused=22-31 > dchan=16 > > span=2,0,0,esf,b8zs > fxols=32-55 > > Here is the log: > -- Accepting call from '28835666' to '98857843' on channel 0/2, span > 1 > -- Executing [98857...@incoming:1] Answer("Zap/2-1", "") in new > stack > -- Executing [98857...@incoming:2] Goto("Zap/2-1", > "ael-queue-office-incoming|s|1") in new stack > -- Goto (ael-queue-office-incoming,s,1) > -- Executing [...@ael-queue-office-incoming:1] Answer("Zap/2-1", "") > in new stack > -- Executing [...@ael-queue-office-incoming:2] Set("Zap/2-1", > "quv_que_nam=office") in new stack > -- Executing [...@ael-queue-office-incoming:3] Wait("Zap/2-1", "2") in > new stack > -- Executing [...@ael-queue-office-incoming:4] Set("Zap/2-1", > "cdv_sts_dbd=2") in new stack > -- Executing [...@ael-queue-office-incoming:5] Set("Zap/2-1", > "~~EXTEN~~=s") in new stack > -- Executing [...@ael-queue-office-incoming:6] Goto("Zap/2-1", > "sw-104-2|10") in new stack > -- Goto (ael-queue-office-incoming,sw-104-2,10) > -- Executing [sw-10...@ael-queue-office-incoming:10] Set("Zap/2-1", > "nsv_sts_dbd=2") in new stack > -- Executing [sw-10...@ael-queue-office-incoming:11] Set("Zap/2-1", > "nsv_div_exs=0") in new stack > -- Executing [sw-10...@ael-queue-office-incoming:12] Set("Zap/2-1", > "~~EXTEN~~=sw-104-2") in new stack > -- Executing [sw-10...@ael-queue-office-incoming:13] Goto("Zap/2-1", > "sw-106-2|10") in new stack > -- Goto (ael-queue-office-incoming,sw-106-2,10) > -- Executing [sw-10...@ael-queue-office-incoming:10] Goto("Zap/2-1", > "ael-queue-office-au|s|1") in new stack > -- Goto (ael-queue-office-au,s,1) > -- Executing [...@ael-queue-office-au:1] SetMusicOnHold("Zap/2-1", > "cpwr") in new stack > -- Executing [...@ael-queue-office-au:2] GotoIf("Zap/2-1", "1?3:5") in > new stack > -- Goto (ael-queue-office-au,s,3) > -- Executing [...@ael-queue-office-au:3] Queue("Zap/2-1", "office|r") > in new stack > -- SIP/343-098f5268 is ringing > -- Channel 0/2, span 1 got hangup, cause 102 > == Spawn extension (ael-queue-office-au, s, 3) exited non-zero on > 'Zap/2-1' > -- Hungup 'Zap/2-1' > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
