Greetings!
I'm hoping someone can help me with what should be the most basic of problems.
Essentially, I want to have certain calls on an Asterisk 1.2.25 (Yes I know its
old, upgrade, etc... its on my roadmap) install go out a couple of analog lines
and all other calls go out a PRI. The analog lines are setup in Zaptel group 1
and the PRI channels are in Zaptel group 0. Here is my relevant config:
; Outbound via POTS
[general-outbound]
exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
exten => _1800NXXXXXX,n,Answer
exten => _1800NXXXXXX,n,Busy
exten => _1800NXXXXXX,n,Hangup
exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN})
exten => _1866NXXXXXX,n,Answer
exten => _1866NXXXXXX,n,Busy
exten => _1866NXXXXXX,n,Hangup
include => pri_outbound
; Outbound via PRI
[pri_outbound]
exten => _X.,101,Dial(ZAP/g0/${EXTEN})
exten => _X.,102,Answer
exten => _X.,103,Busy
exten => _X.,104,Hangup
I certainly cannot be the only one who wants this sort of setup... correct? Is
it the way I'm including the other context, the dial patterns, the priorities,
etc? I'm not opposed to combining it into a single context, I just started it
out with this way. All hints are appreciated. (Pun intended.. :-) )
--Tim
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
