Can you clarify ? Do you want the calls first go through analogs and when they're all in use then through the PRI ? Is that why you're putting the priority 101 in the PRI context ?
Martin On Tue, May 19, 2009 at 10:37 AM, Tim Nelson <[email protected]> wrote: > Greetings! > > I'm hoping someone can help me with what should be the most basic of > problems. Essentially, I want to have certain calls on an Asterisk 1.2.25 > (Yes I know its old, upgrade, etc... its on my roadmap) install go out a > couple of analog lines and all other calls go out a PRI. The analog lines are > setup in Zaptel group 1 and the PRI channels are in Zaptel group 0. Here is > my relevant config: > > ; Outbound via POTS > [general-outbound] > exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN}) > exten => _1800NXXXXXX,n,Answer > exten => _1800NXXXXXX,n,Busy > exten => _1800NXXXXXX,n,Hangup > exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN}) > exten => _1866NXXXXXX,n,Answer > exten => _1866NXXXXXX,n,Busy > exten => _1866NXXXXXX,n,Hangup > include => pri_outbound > > ; Outbound via PRI > [pri_outbound] > exten => _X.,101,Dial(ZAP/g0/${EXTEN}) > exten => _X.,102,Answer > exten => _X.,103,Busy > exten => _X.,104,Hangup > > I certainly cannot be the only one who wants this sort of setup... correct? > Is it the way I'm including the other context, the dial patterns, the > priorities, etc? I'm not opposed to combining it into a single context, I > just started it out with this way. All hints are appreciated. (Pun intended.. > :-) ) > > --Tim > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
