Hi, I finally solved the problem.
As I mentioned in one of my earlier postings, I forgot to install libpri when I compiled the dahdi package for the first time. I fixed that but did not compile asterisk again. Therefore the chan-dahdi.so obviously did not contain the necessary code to react to calls. The second detail was to add signalling = bri_cpe to /etc/asterisk/chan_dahdi.conf Thanks for your help, Stefan David Backeberg schrieb: > On Wed, May 27, 2009 at 2:23 PM, Stefan-Michael Guenther > <asteris...@in-put.de> wrote: >> *CLI> dialplan show >> [ Context 'default' created by 'pbx_config' ] >> '8304478' => 1. ANSWER() [pbx_config] >> 2. WAIT(10) [pbx_config] >> 3. HANGUP() [pbx_config] >> '8304479' => 1. ANSWER() [pbx_config] >> 2. WAIT(10) [pbx_config] >> 3. HANGUP() [pbx_config] >> '83086920' => 1. ANSWER() [pbx_config] >> 2. WAIT(10) [pbx_config] >> 3. HANGUP() [pbx_config] >> '83086921' => 1. ANSWER() [pbx_config] >> 2. WAIT(10) [pbx_config] >> 3. HANGUP() [pbx_config] >> > > Your extensions look good. At this point I'm guessing there's > something silly going on with your physical lines. Do you have an > ordinary telephone for your country that you can plug in and confirm > the lines work properly there. I think at this point you need help > from somebody who knows line signaling for your country. Either your > phone company or Digium tech support if you have a digium card. > -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Geschaeftsfuehrer Moltkestrasse 49 D-76133 Karlsruhe Tel./Fax : +49 (0)721 / 83044 - 98/93 http://www.in-put.de ******************************************** Schulungen Installationen Beratung Support Voice-over-IP-Loesungen ******************************************** _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users