Hi-
I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is:
http://www.evtmedia.com/TE410P.htm
I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector layout matches.
CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture of the PCI slots. I've seen some of the boards posted here do not in actuality have compatible slots.
Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it does not liik like anyone has a board with a 3.3v 32bir, they all go straight to the 64bit slots which i guess is understandable..
Here is a page with some photos.. http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html
Later..
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
