Yes, the card works nicely in the 64-bit slots, it just doesn't use all of the pins. Example, the Tyan S2723 works fine.
The 3.3v key helps to hold it snugly. Cheers Scott Scott M. Stingel Emerging Voice Technology Inc. Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> URL: www.evtmedia.com <http://www.evtmedia.com> -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WipeOut Sent: Tuesday, January 13, 2004 8:15 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo Scott Stingel wrote: >Hi- > >I have posted a photo of the TE410P Digium card on my site, >so that those wishing to purchase a compatible motherboard >can see physically what the PCI slot requirement is: > >http://www.evtmedia.com/TE410P.htm > >I believe the required slot is a 64-bit, 3.3 Volt PCI, most >commonly found on Xeon-based motherboards. A 64-bit slot is >longer than the TE410P board requires, but the PCI connector >layout matches. > >CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture >of the PCI slots. I've seen some of the boards posted here do >not in actuality have compatible slots. > > > Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it does not liik like anyone has a board with a 3.3v 32bir, they all go straight to the 64bit slots which i guess is understandable.. Here is a page with some photos.. http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html Later.. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
