If you're just going to use Asterisk as an internal system, you just need a simple users.conf, sip.conf and about a 5 line dialplan.
Sip.conf [general] srvlookup=yes ;allows DNS lookups of server names naxexpirey=180 defaultexpirey=160 context=default ; Default context for incoming calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=192.168.23.95 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ; Enable DNS SRV lookups on outbound calls limitonpeers=yes notifyringing=yes rtupdate=yes artcachefriends=yes notifyhold=yes incominglimit=1 call-limit=3 [authentication] [104] type=peer context=phones host=dynamic fromuser=104 secret=xxxx canreinvite=yes directrtpsetup=no call-limit=3 nat=yes qualify=yes register=no session-timers=accept session-expires=60 session-minse=120 session-refresher=uac register => 1001:x...@yourpbx.com/1001 defaultip=192.168.23.114 mailbox=1001 disallow=all allow=ulaw,alaw rinse and repeat for 1002-1005 users.conf [general] ; Full name of a user fullname = Unknown User ; Starting point of allocation of extensions userbase = 1001 ; Create voicemail mailbox and use use macro-stdexten hasvoicemail = yes ; Set voicemail mailbox 1001 password to 1234 vmsecret = 1234 ; Create SIP Peer hassip = yes ; Create IAX friend hasiax = no ; Create Agent friend hasagent = no ; Create H.323 friend ;hash323 = yes ; Create manager entry hasmanager = no ; Remaining options are not specific to users.conf entries but are general. callwaiting = yes threewaycalling = yes callwaitingcallerid = yes transfer = yes canpark = yes cancallforward = yes callreturn = yes callgroup = 1 pickupgroup = 1 localextenlength = 4 [1001] username=1001 transfer=yes mailbox=1001 call-limit=3 fullname=user 1 registersip=no host=dynamic callgroup=1 context=default cid_number=1001 hasvoicemail=yes vmsecret=1234 email=us...@yourpbx.com threewaycalling=yes hasdirectory=no callwaiting=yes hasmanager=yes managerread=system,call,log,verbose,command,agent,user,config managerwrite=system,call,log,verbose,command,agent,user,config hasagent=yes hassip=yes hasiax=no secret=xxxx nat=yes canreinvite=no dtmfmode=rfc2833 insecure=no pickupgroup=1 macaddress=000000001111 autoprov=yes label=100 linenumber=1 disallow=all allow=ulaw,gsm repeat for 1002-1005 extensions.conf [default] Exten => s,1,answer Exten => s,n,hangup Exten => _1XXX,1,Dial(SIP/${EXTEN},60.m) _____ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of tom Sent: Wednesday, July 08, 2009 3:38 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] q: install asterisk + asteris-gui thx again, one last question: as i mentioned, i used freepbx before. now i facing only the section: - users > my goal right now is to use that asterisk instance just to have intenral extensions to talk to each other...whats the quickest setup here? i mean i dont need trunks, dialplans etc, right? i just need 5 internal extension, eg 1001-1005 thx u guys are great!
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users