Has anyone played with this phone? i cant seem to get it to work properly, i manged to get it registered and can make calls from it, but i havent been able to make it receive calls. Weird thing its that if you make a call from it and while you are on that call you dial its number does calls go thru in second line, but as soon as you terminate both calls it wont recieve any calls again.
Heres a look from the asterisk CLI : -- Registered SIP '245' at 192.168.0.239 port 5060 expires 60 trixbox1*CLI> sip show peer 245 trixbox1*CLI> Name : 245 Secret : Set MD5Secret : Not set Context : from-internal Subscr.Cont. : Not set Language : AMA flags : Unknown Transfer mode: open CallingPres : Presentation Allowed, Not Screened Callgroup : Pickupgroup : Mailbox : 2...@device VM Extension : *97 LastMsgsSent : 32767/65535 Call limit : 50 Dynamic : Yes Callerid : "device" <245> MaxCallBR : 384 kbps Expire : 67 Insecure : no Nat : RFC3581 ACL : No T38 pt UDPTL : No CanReinvite : No PromiscRedir : No User=Phone : No Video Support: Yes Trust RPID : No Send RPID : No Subscriptions: Yes Overlap dial : Yes DTMFmode : rfc2833 LastMsg : 0 ToHost : Addr->IP : 192.168.0.239 Port 5060 Defaddr->IP : 0.0.0.0 Port 5060 Def. Username: 245 SIP Options : (none) Codecs : 0x4 (ulaw) Codec Order : (ulaw:20) Auto-Framing: No Status : OK (124 ms) Useragent : Slnk/12 Reg. Contact : sip:[email protected]:5060 But after a few seconds the Status goes to UNKNOWN : Auto-Framing: No Status : UNKNOWN <<------ Useragent : Slnk/12 Reg. Contact : sip:[email protected]:5060 This are the config files : sip_245.cfg AUTH = 245; 123456 LINE1 = 245 LINE1_PROXY = 1 LINE1_CALLID = Wireless LINE1_AUTH = 245; 123456 LINE2 = 245 LINE2_PROXY = 1 LINE2_CALLID = Wireless LINE2_AUTH = 245; 123456 sip_allusers.cfg CODECS = g711u, g711a PROXY1_TYPE = Asterisk PROXY1_ADDR = 192.168.0.253:5060 #PROXY1_KEYPRESS_2833 = enable PROXY1_KEYPRESS_INFO = disable PROXY1_HOLD_IP0 = disable #PROXY1_PRACK = enable PROXY1_REREG_SECS=3600 PROXY1_KEEPALIVE_SECS=14 #PROXY1_DOMAIN = 192.168.0.253 PROXY1_CALLID_PER_LINE = disable PROXY1_MAIL_ACCESS = *97 Access Points are Ubiquitki NanoStation 2 in WDS Mode with QoS enabled. One last thing is that while you're on a call you can ping the phone and soon as the call ends phone stops pinging. Any Ideas? Thanks _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
