On Tue, 14 Jul 2009, Cesar Gonzalez wrote: > Jeff LaCoursiere wrote: >> Search the archives - we had a big discussion about this phone about six >> months ago. If you make it work and want another one "I will give you >> special price!". >> >> j >> >> > Jeff, yeah i saw the posts, i followed Bob Pierce config and had no > luck, BUT it just started to work, i changed AP's, seems like theres > something wrong with Ubiquiti NanoStation2 WMM implementation, i used a > Linksys WRT54G2 and viola! it started to work, i guess i should've done > that to begin with... :( > > I'll play around whit the Nanostations QoS settings and see if i can get > it to work on those AP's. > > What AP's were you using?
Hi Cesar, I did actually get it to work as well, and was using Linksys WRT54G with dd-wrt. I *intended* for the phone to be useful at random wifi hotspots, however, and was a bit disappointed to find that that was not going to work. So it sits on a shelf gathering dust... Cheers, j > > -Cesar > >> On Tue, 14 Jul 2009, Cesar Gonzalez wrote: >> >> >>> Has anyone played with this phone? i cant seem to get it to work >>> properly, i manged to get it registered and can make calls from it, but >>> i havent been able to make it receive calls. Weird thing its that if you >>> make a call from it and while you are on that call you dial its number >>> does calls go thru in second line, but as soon as you terminate both >>> calls it wont recieve any calls again. >>> >>> Heres a look from the asterisk CLI : >>> >>> -- Registered SIP '245' at 192.168.0.239 port 5060 expires 60 >>> trixbox1*CLI> sip show peer 245 >>> trixbox1*CLI> >>> >>> Name : 245 >>> Secret : Set >>> MD5Secret : Not set >>> Context : from-internal >>> Subscr.Cont. : Not set >>> Language : >>> AMA flags : Unknown >>> Transfer mode: open >>> CallingPres : Presentation Allowed, Not Screened >>> Callgroup : >>> Pickupgroup : >>> Mailbox : 2...@device >>> VM Extension : *97 >>> LastMsgsSent : 32767/65535 >>> Call limit : 50 >>> Dynamic : Yes >>> Callerid : "device" <245> >>> MaxCallBR : 384 kbps >>> Expire : 67 >>> Insecure : no >>> Nat : RFC3581 >>> ACL : No >>> T38 pt UDPTL : No >>> CanReinvite : No >>> PromiscRedir : No >>> User=Phone : No >>> Video Support: Yes >>> Trust RPID : No >>> Send RPID : No >>> Subscriptions: Yes >>> Overlap dial : Yes >>> DTMFmode : rfc2833 >>> LastMsg : 0 >>> ToHost : >>> Addr->IP : 192.168.0.239 Port 5060 >>> Defaddr->IP : 0.0.0.0 Port 5060 >>> Def. Username: 245 >>> SIP Options : (none) >>> Codecs : 0x4 (ulaw) >>> Codec Order : (ulaw:20) >>> Auto-Framing: No >>> Status : OK (124 ms) >>> Useragent : Slnk/12 >>> Reg. Contact : sip:[email protected]:5060 >>> >>> But after a few seconds the Status goes to UNKNOWN : >>> >>> Auto-Framing: No >>> Status : UNKNOWN <<------ >>> Useragent : Slnk/12 >>> Reg. Contact : sip:[email protected]:5060 >>> >>> This are the config files : >>> >>> sip_245.cfg >>> AUTH = 245; 123456 >>> LINE1 = 245 >>> LINE1_PROXY = 1 >>> LINE1_CALLID = Wireless >>> LINE1_AUTH = 245; 123456 >>> LINE2 = 245 >>> LINE2_PROXY = 1 >>> LINE2_CALLID = Wireless >>> LINE2_AUTH = 245; 123456 >>> >>> sip_allusers.cfg >>> CODECS = g711u, g711a >>> PROXY1_TYPE = Asterisk >>> PROXY1_ADDR = 192.168.0.253:5060 >>> #PROXY1_KEYPRESS_2833 = enable >>> PROXY1_KEYPRESS_INFO = disable >>> PROXY1_HOLD_IP0 = disable >>> #PROXY1_PRACK = enable >>> PROXY1_REREG_SECS=3600 >>> PROXY1_KEEPALIVE_SECS=14 >>> #PROXY1_DOMAIN = 192.168.0.253 >>> PROXY1_CALLID_PER_LINE = disable >>> PROXY1_MAIL_ACCESS = *97 >>> >>> Access Points are Ubiquitki NanoStation 2 in WDS Mode with QoS enabled. >>> >>> One last thing is that while you're on a call you can ping the phone and >>> soon as the call ends phone stops pinging. >>> >>> Any Ideas? >>> Thanks >>> >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
