Jean-Yves Avenard wrote: > From reading the various documentation, I was convinced that moving > from zaptel to dahdi was almost just a matter of renaming the > configuration file... Am I mistaken ?
Did you read the upgrade documentation that comes with DAHDI, specifically from UPGRADE.txt: > * It is no longer possible to select a software echo canceler at > compile time to build into dahdi.ko; all four included echo > cancelers (MG2, KB1, SEC and SEC2) are built as loadable modules, > and if the Digium HPEC binary object file has been placed into the > proper directory the HPEC module will be built as well. Any or all > of these modules can be loaded at the same time, and the echo > canceler to be used on the system's channels can be configured using > the dahdi_cfg tool from the dahdi-tools package. > > Note: It is *mandatory* to configure an echo canceler for the > system's channels using dahdi_cfg unless the interface cards in use > have echo canceler modules available and enabled. There is *no* > default software echo canceler with DAHDI. > -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA skype: kpfleming | jabber: [email protected] Check us out at www.digium.com & www.asterisk.org _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
