Hi That was a fast answer, impressive ! 2009/8/18 Kevin P. Fleming <[email protected]>: > > Did you read the upgrade documentation that comes with DAHDI, > specifically from UPGRADE.txt:
I did, but I guess I did not pay enough attention... > >> * It is no longer possible to select a software echo canceler at >> compile time to build into dahdi.ko; all four included echo >> cancelers (MG2, KB1, SEC and SEC2) are built as loadable modules, >> and if the Digium HPEC binary object file has been placed into the >> proper directory the HPEC module will be built as well. Any or all >> of these modules can be loaded at the same time, and the echo >> canceler to be used on the system's channels can be configured using >> the dahdi_cfg tool from the dahdi-tools package. >> >> Note: It is *mandatory* to configure an echo canceler for the >> system's channels using dahdi_cfg unless the interface cards in use >> have echo canceler modules available and enabled. There is *no* >> default software echo canceler with DAHDI. >> > So, knowing my card (a Digium TE-110P, which AFAIK doesn't have any hardware echo cancellation module)... Which software echo canceller should I be using ? Is see that there are particular software configuration available , but I haven't had a clue on what they are for, nor did I find documentation about it... I'm not building asterisk nor dahdi myself, but instead rely on packaged from ATrpms.conf Thank you Jean-Yves _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
