On Tue, Aug 18, 2009 at 12:09 PM, Boehm, Matthew<[email protected]> wrote:
> Hello,
>
> I have at my disposal, 2, TE410P cards. I have setup an asterisk box that
> will function ONLY to handle meetme conferences over SIP. No PRI lines to be
> plugged into the 410 card.
>
> MeetMe requires an external timing source. Right now, using the dummy
> driver. Is it possible to use the card solely for timing purposes?
Yes, it is possible to use the card solely for timing.
>Any benefit to doing so?
I happen to think so, but I haven't been practicing what I preach
because the gear I chose for my meetme boxes don't have a free PCI{,e}
slot. If you trust the output of dahdi_test, you get better results
with a real card than with dahdi_dummy.
>Or should I just sell the cards?
I'm personally hanging onto mine, and planning to redo my setup with
systems that have an open slot for the cards when I get some open
schedule later. But even after the changes I'll have spare cards. I'm
going to keep them around for a lab environment and suggest you do the
same.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
