By Connecting a loopback connector to a port the line turns green. http://i580.photobucket.com/albums/ss246/shakeelabbas/loop_back.jpg
using dahdi show status i get this Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO T4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) T4XXP (PCI) Card 0 Span 2 RED 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) T4XXP (PCI) Card 0 Span 3 RED 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) T4XXP (PCI) Card 0 Span 4 RED 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) *CLI> [Sep 9 14:41:34] WARNING[9973]: chan_dahdi.c:11879 pri_dchannel: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. But I cant generate calls using the loop back connector and get the following error *CLI> [Sep 9 14:42:55] NOTICE[9981]: channel.c:3749 __ast_request_and_dial: Unable to request channel DAHDI/1/123 THANKS On Wed, Sep 9, 2009 at 12:47 PM, ABBAS SHAKEEL <shakeel.abbas....@gmail.com>wrote: > HelloI have the following system > > Asterisk 1.6.1dahdi 2.2.0.2 > > TE420P card > > Centos > > I have noticed that all the four lights are blinking(ie coming red and > then off so on)... > > Previously I also noted that when dahdi drivers are not installed lights > blink but one by one in sequence(like in marriage cermonies :P) and after > dahdi installation lights get off ... but this time all at same time > (blinking) > > > Is this a problem ?? > > -- > Best Regards > Shakeel Abbas > > -- Best Regards Shakeel Abbas
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
