Thanks you very much Kevin.I will try it by connecting one end of Ethernet cable to one slot and other to second slot . Configuring one as pri_net and the other as pri_cpe.
I will provide you feed on monday either i succed or not On Fri, Sep 11, 2009 at 4:23 PM, Kevin P. Fleming <kpflem...@digium.com>wrote: > ABBAS SHAKEEL wrote: > > > But I cant generate calls using the loop back connector and get the > > following error > > > > > > *CLI> [Sep 9 14:42:55] NOTICE[9981]: channel.c:3749 > > __ast_request_and_dial: Unable to request channel DAHDI/1/123 > > You cannot use a loopback connector for a PRI interface; PRI signaling > has a 'network' end and a 'customer' end, and using a loopback connector > will make the system try to be both at the same time, which is not > possible. > > You can use CAS (FXS/FXO/etc.) signaling on a loopback connector, or you > can make a crossover cable and connect two ports of your card together, > configuring one of them as pri_net and the other as pri_cpe. > > -- > Kevin P. Fleming > Digium, Inc. | Director of Software Technologies > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > skype: kpfleming | jabber: kpflem...@digium.com > Check us out at www.digium.com & www.asterisk.org > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2009 - October 13 - 15 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Best Regards Shakeel Abbas
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
