On Friday 25 September 2009 10:19:39 Stephen Brown Jr wrote: > Ok so this is officially driving me crazy. I have an Asterisk 1.6.1.6 > install with DAHDI/DAHDI tools (latest) and an OpenVOX TDM400 card with 1 > FXO port and 1 FXS port. I have a POTS line from my phone company attached > to the POTS line. > > I have asked for "disconnect supervision" to be provisioned on my line and > they claim to have added it. However, my scenario is as follows: > > I receive a call, if the caller hangs up before hitting voice mail, the > DAHDI channel is released as to be expected (evidenced from console > messaging) > If the call gets to voicemail and the caller hangs up during the greeting, > no hangup condition is ever detected and I am greeted with a useless > voicemail moments later. > > I am using kewlstart signaling etc. I came across this page from Digium: > > http://kb.digium.com/entry/6/ > > This suggests adjusting a variable in zaptel.h, as I don't use zaptel, can > this same logic be applied to DAHDI somewhere? My theory is that the > "disconnect supervision" signal coming from the phone company may be less > than 1000ms.
The equivalent header in DAHDI is include/dahdi/kernel.h, in the dahdi-linux source package. -- Tilghman Lesher Digium, Inc. | Senior Software Developer twitter: Corydon76 | IRC: Corydon76-dig (Freenode) Check us out at: www.digium.com & www.asterisk.org _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
