1) I have not seen a blue light (usually red/yellow) before on a Digium card and so don't really know what it means. 2) Try to see if you can see any messages coming up from the Asterisk box itself (not thru putty or other remote console). You should see a steady stream of error messages coming up. Also, look at /var/log/asterisk/messages or event_log. There may or may not be anything there. 3) I see that "loadzone = cn" which means the installation is in China. 4) My experience tells me that if it is in major China cities, the ISDN line would be E1 which is correct but from the installations I did, China's E1 does not like CRC4. 5) I think it is highly likely to be a ISDN line config (telco or Asterisk side) problem. 6) You can try contacting Digium support too. They provide prompt support but you have to register you serial no first.
________________________________________ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Klaverstyn, David C Sent: Tuesday, 29 September 2009 10:07 AM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] TE121P Blue Alarm/Recovering I'd appreciate it if someone was able to assist. Running the command: dahdi_hardware: pci:0000:08:08.0 wcte12xp+ d161:8000 Wildcard TE121 dahdi_scan: [1] active=yes alarms=REC description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 with VPMADT032 location=PCI Bus 08 Slot 09 basechan=1 totchans=31 irq=169 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS cat /etc/dahdi/system.conf: bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 loadzone = cn defaultzone = cn From: Klaverstyn, David C Sent: Monday, 28 September 2009 5:05 PM To: 'asterisk-users@lists.digium.com' Subject: TE121P Blue Alarm/Recovering Hi All, I have a TE121P card installed and since connected it to the PRI I keep getting the Current Alarm as continually changing from Blue Alarm/Recovering and Recovering. The config I have is: /etc/dahdi/system.conf bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 loadzone = cn defaultzone = cn /etc/asterisk/chan_dahdi.cfg [channels] Context=telco language=cn switchtype=euroisdn signalling=pri_cpe rxwink=300 usecallerid=yes . . echocancel=yes group=1 channel=>1-15,17-31 I installed the following components Asterisk 1.4.26.2 DAHDI Linux 2.2.0.2 DAHDI Tools 2.2.0 Libpri 1.4.10.1 Addons 1.4.9 Any help would be greatly appreciated. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
