> Many thanks John of Sydney. My pleasure my fellow Asterisker! > I removed the CRC4 and it worked straight away. Can you recommend a CRC > type at all or would it be best to leave it as nothing? Just leave it blank would do.
> -----Original Message----- > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Klaverstyn, David C > Sent: Tuesday, 29 September 2009 10:49 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] TE121P Blue Alarm/Recovering > > Many thanks John of Sydney. > > I removed the CRC4 and it worked straight away. Can you recommend a CRC > type at all or would it be best to leave it as nothing? > > David of Brisbane. > > -----Original Message----- > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Lee, John (Sydney) > Sent: Tuesday, 29 September 2009 10:35 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] TE121P Blue Alarm/Recovering > > > 1) I have not seen a blue light (usually red/yellow) before on a Digium > card and so don't really know what it means. > 2) Try to see if you can see any messages coming up from the Asterisk box > itself (not thru putty or other remote console). You should see a steady > stream of error messages coming up. Also, look at > /var/log/asterisk/messages or event_log. There may or may not be anything > there. > 3) I see that "loadzone = cn" which means the installation is in China. > 4) My experience tells me that if it is in major China cities, the ISDN > line would be E1 which is correct but from the installations I did, > China's E1 does not like CRC4. > 5) I think it is highly likely to be a ISDN line config (telco or Asterisk > side) problem. > 6) You can try contacting Digium support too. They provide prompt support > but you have to register you serial no first. > > ________________________________________ > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Klaverstyn, David C > Sent: Tuesday, 29 September 2009 10:07 AM > To: [email protected] > Subject: Re: [asterisk-users] TE121P Blue Alarm/Recovering > > I'd appreciate it if someone was able to assist. > > Running the command: > dahdi_hardware: > pci:0000:08:08.0 wcte12xp+ d161:8000 Wildcard TE121 > > dahdi_scan: > [1] > active=yes > alarms=REC > description=Wildcard TE121 Card 0 > name=WCT1/0 > manufacturer=Digium > devicetype=Wildcard TE121 with VPMADT032 > location=PCI Bus 08 Slot 09 > basechan=1 > totchans=31 > irq=169 > type=digital-E1 > syncsrc=1 > lbo=0 db (CSU)/0-133 feet (DSX-1) > coding_opts=HDB3 > framing_opts=CCS,CRC4 > coding=HDB3 > framing=CCS > > cat /etc/dahdi/system.conf: > bchan=1-15,17-31 > dchan=16 > echocanceller=mg2,1-15,17-31 > > loadzone = cn > defaultzone = cn > > > From: Klaverstyn, David C > Sent: Monday, 28 September 2009 5:05 PM > To: '[email protected]' > Subject: TE121P Blue Alarm/Recovering > > Hi All, > > I have a TE121P card installed and since connected it to the PRI I keep > getting the Current Alarm as continually changing from Blue > Alarm/Recovering and Recovering. > > The config I have is: > > /etc/dahdi/system.conf > bchan=1-15,17-31 > dchan=16 > echocanceller=mg2,1-15,17-31 > > loadzone = cn > defaultzone = cn > > /etc/asterisk/chan_dahdi.cfg > [channels] > Context=telco > language=cn > switchtype=euroisdn > signalling=pri_cpe > rxwink=300 > usecallerid=yes > . > . > echocancel=yes > group=1 > channel=>1-15,17-31 > > > I installed the following components > Asterisk 1.4.26.2 > DAHDI Linux 2.2.0.2 > DAHDI Tools 2.2.0 > Libpri 1.4.10.1 > Addons 1.4.9 > > > Any help would be greatly appreciated. > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2009 - October 13 - 15 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2009 - October 13 - 15 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
