On Tue, Nov 10, 2009 at 10:13 AM, Warren Selby <[email protected]> wrote: > In your sip.conf file, be sure to specify nat=no for the phone, even > though the phone is behind a nat device. The cisco phones handle sip > packets differently than the way asterisk expects, so you have to do > this in order to make asterisk send the way the phone will accept. > > > > Thanks, > --Warren Selby
Thanks, as a test I changed both a 7960 and 7942 both to "nat=no" the latter being the one I'm having trouble registering. The 7960 then was unable to register so I changed it back to "nat=yes". When I changed the 7942 to "nat=no" and disabled registerWithProxy I can get a dial tone but can't dial out due to the following: SIP/2.0 407 Proxy Authentication Required I tried re-enabling the proxy but then I get nothing as before. >From the sip.conf I would assume that <registerWithProxy> would be the same as the realm and the <proxy> statement for the phone be the same as the domain? realm=ns1.domain.net domain=domain.net Thanks again for any help. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
