On Wed, Nov 11, 2009 at 9:34 PM, Warren Selby <[email protected]> wrote: > The 7960 and 79x2 use different sip firmwares and as far a I have seen > the 7960 does not have the same port issue the 7941/2 seems to have > (which technically is not a problem, just an implementation of the sip > protocol that you don't typically see). > > As to your issue, are you still seeing the same error messages in the > ssh logs? I haven't ever had to use the register with proxy settings > in my configs, but I've only worked with the 79x1 series phones, not > the x2. > > I've actually got a post up on my blog addressing setting up a 7941 in > a situation similar to yours: > > http://www.selbytech.com/2009/10/setup-cisco-7941-or-7961-with-asterisk/ > > In that post is a sanitized version of my conf file that I use on my > own deskphone, if you'd like to download it and try it out with your > setup. >
My config is very similar though my only question is you have registerWithProxy set to true though nothing defined. Was this a sanitation mistake? <sipProxies> <backupProxy/> <backupProxyPort/> <emergencyProxy/> <emergencyProxyPort/> <outboundProxy/> <outboundProxyPort/> <registerWithProxy>true</registerWithProxy> </sipProxies> _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
