Check this command "snmpwalk -c your_community -v 1 localhost interfaces"
in my system it's looks like that: IF-MIB::ifNumber.0 = INTEGER: 4 IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: sit0 IF-MIB::ifType.1 = INTEGER: softwareLoopback(24) IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6) IF-MIB::ifType.4 = INTEGER: tunnel(131) IF-MIB::ifMtu.1 = INTEGER: 16436 IF-MIB::ifMtu.2 = INTEGER: 1500 IF-MIB::ifMtu.3 = INTEGER: 1500 IF-MIB::ifMtu.4 = INTEGER: 1480 IF-MIB::ifSpeed.1 = Gauge32: 10000000 IF-MIB::ifSpeed.2 = Gauge32: 10000000 IF-MIB::ifSpeed.3 = Gauge32: 1000000000 IF-MIB::ifSpeed.4 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: IF-MIB::ifPhysAddress.2 = STRING: 0:14:5e:32:15:70 IF-MIB::ifPhysAddress.3 = STRING: 0:14:5e:32:15:71 IF-MIB::ifPhysAddress.4 = STRING: IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifAdminStatus.2 = INTEGER: down(2) IF-MIB::ifAdminStatus.3 = INTEGER: up(1) IF-MIB::ifAdminStatus.4 = INTEGER: down(2) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.2 = INTEGER: down(2) IF-MIB::ifOperStatus.3 = INTEGER: up(1) IF-MIB::ifOperStatus.4 = INTEGER: down(2) IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00 IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00 IF-MIB::ifInOctets.1 = Counter32: 37919437 IF-MIB::ifInOctets.2 = Counter32: 0 IF-MIB::ifInOctets.3 = Counter32: 1491657594 IF-MIB::ifInOctets.4 = Counter32: 0 IF-MIB::ifInUcastPkts.1 = Counter32: 335932 IF-MIB::ifInUcastPkts.2 = Counter32: 0 IF-MIB::ifInUcastPkts.3 = Counter32: 162961409 IF-MIB::ifInUcastPkts.4 = Counter32: 0 IF-MIB::ifInNUcastPkts.1 = Counter32: 0 IF-MIB::ifInNUcastPkts.2 = Counter32: 0 IF-MIB::ifInNUcastPkts.3 = Counter32: 131166 IF-MIB::ifInNUcastPkts.4 = Counter32: 0 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInDiscards.2 = Counter32: 0 IF-MIB::ifInDiscards.3 = Counter32: 0 IF-MIB::ifInDiscards.4 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInErrors.2 = Counter32: 0 IF-MIB::ifInErrors.3 = Counter32: 0 IF-MIB::ifInErrors.4 = Counter32: 0 IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifInUnknownProtos.2 = Counter32: 0 IF-MIB::ifInUnknownProtos.3 = Counter32: 0 IF-MIB::ifInUnknownProtos.4 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 37919437 IF-MIB::ifOutOctets.2 = Counter32: 0 IF-MIB::ifOutOctets.3 = Counter32: 3525337520 IF-MIB::ifOutOctets.4 = Counter32: 0 IF-MIB::ifOutUcastPkts.1 = Counter32: 335932 IF-MIB::ifOutUcastPkts.2 = Counter32: 0 IF-MIB::ifOutUcastPkts.3 = Counter32: 38811075 IF-MIB::ifOutUcastPkts.4 = Counter32: 0 IF-MIB::ifOutNUcastPkts.1 = Counter32: 0 IF-MIB::ifOutNUcastPkts.2 = Counter32: 0 IF-MIB::ifOutNUcastPkts.3 = Counter32: 0 IF-MIB::ifOutNUcastPkts.4 = Counter32: 0 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutDiscards.2 = Counter32: 0 IF-MIB::ifOutDiscards.3 = Counter32: 0 IF-MIB::ifOutDiscards.4 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutErrors.2 = Counter32: 0 IF-MIB::ifOutErrors.3 = Counter32: 0 IF-MIB::ifOutErrors.4 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 0 IF-MIB::ifOutQLen.2 = Gauge32: 0 IF-MIB::ifOutQLen.3 = Gauge32: 0 IF-MIB::ifOutQLen.4 = Gauge32: 0 IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero here You have information about interface descryptions, status, speed, type, etc. BR, Michał 2009/11/27 Mr. James W. Laferriere <[email protected]>: > Hello Micha (& all) , > > On Fri, 27 Nov 2009, michal kalinowski wrote: >> >> Your Digium card is for linux standard interface like eth0 (ethernet), >> check IF-MIB.txt and OID from there. >> BR, >> Micha? > > When doing a snmpwalk of the IF-MIB & having a (*) installed there is > no mention of an interface associated with this card . Now it is quite > possible that Digium in there wisdom has added the necessary components to > their drivers that inserts the necessary components into the IF tables thus > allowing snmp's IF-MIB to see a known interface . > > If this is the case where in the driver (or code base) might I find > this revelation . I'd sure like to have statistics & traps being dumped for > this card . > > (*) > 01:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN > interface > > Tia , JimL > >> 2009/11/27 mickael ropars <[email protected]>: >>> >>> Everuthing is working fine, but I have another question to SNMP users: >>> >>> There is no hardware info in the MIB. >>> >>> How can you do to send alarm (when one interface is down for exemple), is >>> there no way to check its status? >>> >>> NB: I am using a Digium card >>> >>> regards >>> >>> Mickael >>> >>> 2009/11/27 mickael ropars <[email protected]> >>>> >>>> Hi all, >>>> >>>> I am currently not able to configure SNMP for asterisk, but I am not >>>> able >>>> to acess to the asterisk MIB (the asterisk MIB is in >>>> /usr/share/snmp/mibs/) >>>> >>>> >>>> Does somebody has an example of smnpd.conf file wich is working ? >>>> >>>> regards >>>> >>>> Mickael >>> >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > -- > +------------------------------------------------------------------+ > | James W. Laferriere | System Techniques | Give me VMS | > | Network&System Engineer | 3237 Holden Road | Give me Linux | > | [email protected] | Fairbanks, AK. 99709 | only on AXP | > +------------------------------------------------------------------+ > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
