It will be the same, I already have 4 E1 interfaces. but no information in the MIB
2009/11/28 michal kalinowski <[email protected]> > Yes I know about that :) at this moment i have only machine with > lo,eth0,eth1,sit0. > On monday I will check that command on the server with e1 card. > > BR, > Michał > > W dniu 27 listopada 2009 23:51 użytkownik mickael ropars > <[email protected]> napisał: > > Michal, > > > > in the IF-MIB you only have 4 interfaces lo,eth0,eth1,sit0 > > > > l0 which is the loopback interface > > eth0, eth1 : ethernet interface > > sit0 : use for PTP tunneling (use for IPv6) > > > > so no information on the digium interface. > > > > my IF MIB has also those interfaces > > > > I found one the solution to get status of the cards, and all snmp data. > the > > solution is argus : > > http://argus.tcp4me.com/ > > > > with this tools you can have a complete view of your system. > > > > regards > > > > Mickael > > > > 2009/11/27 michal kalinowski <[email protected]> > >> > >> Check this command "snmpwalk -c your_community -v 1 localhost > interfaces" > >> > >> in my system it's looks like that: > >> > >> IF-MIB::ifNumber.0 = INTEGER: 4 > >> IF-MIB::ifIndex.1 = INTEGER: 1 > >> IF-MIB::ifIndex.2 = INTEGER: 2 > >> IF-MIB::ifIndex.3 = INTEGER: 3 > >> IF-MIB::ifIndex.4 = INTEGER: 4 > >> IF-MIB::ifDescr.1 = STRING: lo > >> IF-MIB::ifDescr.2 = STRING: eth0 > >> IF-MIB::ifDescr.3 = STRING: eth1 > >> IF-MIB::ifDescr.4 = STRING: sit0 > >> IF-MIB::ifType.1 = INTEGER: softwareLoopback(24) > >> IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6) > >> IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6) > >> IF-MIB::ifType.4 = INTEGER: tunnel(131) > >> IF-MIB::ifMtu.1 = INTEGER: 16436 > >> IF-MIB::ifMtu.2 = INTEGER: 1500 > >> IF-MIB::ifMtu.3 = INTEGER: 1500 > >> IF-MIB::ifMtu.4 = INTEGER: 1480 > >> IF-MIB::ifSpeed.1 = Gauge32: 10000000 > >> IF-MIB::ifSpeed.2 = Gauge32: 10000000 > >> IF-MIB::ifSpeed.3 = Gauge32: 1000000000 > >> IF-MIB::ifSpeed.4 = Gauge32: 0 > >> IF-MIB::ifPhysAddress.1 = STRING: > >> IF-MIB::ifPhysAddress.2 = STRING: 0:14:5e:32:15:70 > >> IF-MIB::ifPhysAddress.3 = STRING: 0:14:5e:32:15:71 > >> IF-MIB::ifPhysAddress.4 = STRING: > >> IF-MIB::ifAdminStatus.1 = INTEGER: up(1) > >> IF-MIB::ifAdminStatus.2 = INTEGER: down(2) > >> IF-MIB::ifAdminStatus.3 = INTEGER: up(1) > >> IF-MIB::ifAdminStatus.4 = INTEGER: down(2) > >> IF-MIB::ifOperStatus.1 = INTEGER: up(1) > >> IF-MIB::ifOperStatus.2 = INTEGER: down(2) > >> IF-MIB::ifOperStatus.3 = INTEGER: up(1) > >> IF-MIB::ifOperStatus.4 = INTEGER: down(2) > >> IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00 > >> IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00 > >> IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00 > >> IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00 > >> IF-MIB::ifInOctets.1 = Counter32: 37919437 > >> IF-MIB::ifInOctets.2 = Counter32: 0 > >> IF-MIB::ifInOctets.3 = Counter32: 1491657594 > >> IF-MIB::ifInOctets.4 = Counter32: 0 > >> IF-MIB::ifInUcastPkts.1 = Counter32: 335932 > >> IF-MIB::ifInUcastPkts.2 = Counter32: 0 > >> IF-MIB::ifInUcastPkts.3 = Counter32: 162961409 > >> IF-MIB::ifInUcastPkts.4 = Counter32: 0 > >> IF-MIB::ifInNUcastPkts.1 = Counter32: 0 > >> IF-MIB::ifInNUcastPkts.2 = Counter32: 0 > >> IF-MIB::ifInNUcastPkts.3 = Counter32: 131166 > >> IF-MIB::ifInNUcastPkts.4 = Counter32: 0 > >> IF-MIB::ifInDiscards.1 = Counter32: 0 > >> IF-MIB::ifInDiscards.2 = Counter32: 0 > >> IF-MIB::ifInDiscards.3 = Counter32: 0 > >> IF-MIB::ifInDiscards.4 = Counter32: 0 > >> IF-MIB::ifInErrors.1 = Counter32: 0 > >> IF-MIB::ifInErrors.2 = Counter32: 0 > >> IF-MIB::ifInErrors.3 = Counter32: 0 > >> IF-MIB::ifInErrors.4 = Counter32: 0 > >> IF-MIB::ifInUnknownProtos.1 = Counter32: 0 > >> IF-MIB::ifInUnknownProtos.2 = Counter32: 0 > >> IF-MIB::ifInUnknownProtos.3 = Counter32: 0 > >> IF-MIB::ifInUnknownProtos.4 = Counter32: 0 > >> IF-MIB::ifOutOctets.1 = Counter32: 37919437 > >> IF-MIB::ifOutOctets.2 = Counter32: 0 > >> IF-MIB::ifOutOctets.3 = Counter32: 3525337520 > >> IF-MIB::ifOutOctets.4 = Counter32: 0 > >> IF-MIB::ifOutUcastPkts.1 = Counter32: 335932 > >> IF-MIB::ifOutUcastPkts.2 = Counter32: 0 > >> IF-MIB::ifOutUcastPkts.3 = Counter32: 38811075 > >> IF-MIB::ifOutUcastPkts.4 = Counter32: 0 > >> IF-MIB::ifOutNUcastPkts.1 = Counter32: 0 > >> IF-MIB::ifOutNUcastPkts.2 = Counter32: 0 > >> IF-MIB::ifOutNUcastPkts.3 = Counter32: 0 > >> IF-MIB::ifOutNUcastPkts.4 = Counter32: 0 > >> IF-MIB::ifOutDiscards.1 = Counter32: 0 > >> IF-MIB::ifOutDiscards.2 = Counter32: 0 > >> IF-MIB::ifOutDiscards.3 = Counter32: 0 > >> IF-MIB::ifOutDiscards.4 = Counter32: 0 > >> IF-MIB::ifOutErrors.1 = Counter32: 0 > >> IF-MIB::ifOutErrors.2 = Counter32: 0 > >> IF-MIB::ifOutErrors.3 = Counter32: 0 > >> IF-MIB::ifOutErrors.4 = Counter32: 0 > >> IF-MIB::ifOutQLen.1 = Gauge32: 0 > >> IF-MIB::ifOutQLen.2 = Gauge32: 0 > >> IF-MIB::ifOutQLen.3 = Gauge32: 0 > >> IF-MIB::ifOutQLen.4 = Gauge32: 0 > >> IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero > >> IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero > >> IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero > >> IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero > >> > >> here You have information about interface descryptions, status, speed, > >> type, etc. > >> > >> BR, > >> Michał > >> 2009/11/27 Mr. James W. Laferriere <[email protected]>: > >> > Hello Micha (& all) , > >> > > >> > On Fri, 27 Nov 2009, michal kalinowski wrote: > >> >> > >> >> Your Digium card is for linux standard interface like eth0 > (ethernet), > >> >> check IF-MIB.txt and OID from there. > >> >> BR, > >> >> Micha? > >> > > >> > When doing a snmpwalk of the IF-MIB & having a (*) installed > >> > there is > >> > no mention of an interface associated with this card . Now it is > quite > >> > possible that Digium in there wisdom has added the necessary > components > >> > to > >> > their drivers that inserts the necessary components into the IF tables > >> > thus > >> > allowing snmp's IF-MIB to see a known interface . > >> > > >> > If this is the case where in the driver (or code base) might I > >> > find > >> > this revelation . I'd sure like to have statistics & traps being > dumped > >> > for > >> > this card . > >> > > >> > (*) > >> > 01:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX > >> > Modem/ISDN > >> > interface > >> > > >> > Tia , JimL > >> > > >> >> 2009/11/27 mickael ropars <[email protected]>: > >> >>> > >> >>> Everuthing is working fine, but I have another question to SNMP > users: > >> >>> > >> >>> There is no hardware info in the MIB. > >> >>> > >> >>> How can you do to send alarm (when one interface is down for > exemple), > >> >>> is > >> >>> there no way to check its status? > >> >>> > >> >>> NB: I am using a Digium card > >> >>> > >> >>> regards > >> >>> > >> >>> Mickael > >> >>> > >> >>> 2009/11/27 mickael ropars <[email protected]> > >> >>>> > >> >>>> Hi all, > >> >>>> > >> >>>> I am currently not able to configure SNMP for asterisk, but I am > not > >> >>>> able > >> >>>> to acess to the asterisk MIB (the asterisk MIB is in > >> >>>> /usr/share/snmp/mibs/) > >> >>>> > >> >>>> > >> >>>> Does somebody has an example of smnpd.conf file wich is working ? > >> >>>> > >> >>>> regards > >> >>>> > >> >>>> Mickael > >> >>> > >> >>> > >> >>> _______________________________________________ > >> >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > >> >>> > >> >>> asterisk-users mailing list > >> >>> To UNSUBSCRIBE or update options visit: > >> >>> http://lists.digium.com/mailman/listinfo/asterisk-users > >> >>> > >> >> > >> >> _______________________________________________ > >> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > >> >> > >> >> asterisk-users mailing list > >> >> To UNSUBSCRIBE or update options visit: > >> >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> >> > >> > > >> > -- > >> > +------------------------------------------------------------------+ > >> > | James W. Laferriere | System Techniques | Give me VMS | > >> > | Network&System Engineer | 3237 Holden Road | Give me Linux | > >> > | [email protected] | Fairbanks, AK. 99709 | only on AXP | > >> > +------------------------------------------------------------------+ > >> > _______________________________________________ > >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > > >> > asterisk-users mailing list > >> > To UNSUBSCRIBE or update options visit: > >> > http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > >> > >> _______________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
