Hi All, After searching and didnt found it, im just sending my situation here, maybe someone knows where i should look. Im using Asterisk 1.6.1.10
Internally the user with a sip phone dials a number for instance 0623456789 It goes fine to the specific dial rule: which is: exten => _0[6].,2,Dial(SIP/0${EXTEN:1...@xs4all-out,60,tTwWkK) This works fine without a charm, but the situation is that i want to hide the phonenumber going out, this is done in the netherlands by dialling *31# and then the phonenumber you want to call. so i modified it to: exten => _0[6].,2,Dial(SIP/*31#0${EXTEN:1...@xs4all-out,60,tTwWkK) Only then it doesnt work, since i prolly need to wait before dialling the number. so after searching i saw several posts and sites which stated that i need to use 'w' in the dial command. So i changed it to: exten => _0[6].,2,Dial(SIP/*31#w0${EXTEN:1...@xs4all-out,60,tTwWkK) But then the other peer says: -- Called *31#w06123456...@xs4all-out -- SIP/xs4all-out-00000234 is circuit-busy == Everyone is busy/congested at this time (1:0/1/0) -- Auto fallthrough, channel 'SIP/evert-00000233' status is 'CONGESTION' Anyone an idea where i should look, or how i should change it, so that i do get a wait before sending the rest of the number to the sip peer. Thanks in advance, Regards, Evert -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users