Thanks you were exactly right. I had a problem in my chan_dadhi.conf file. Basically, I had the channels defined before the signaling and it wouldn't load. It did not show any errors that I could see on startup and there were no messages in the /var/log/asterisk/messages but when doing a "load chan_dahdi.so" from the command line showed me the problem.
Thanks again! ===== Eric Merkel [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Anthony Francis - Handy Networks LLC Sent: 2010-01-21 15:50 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] pri CLI command not available This is often caused by the dahdi module not loading, check /var/log/asterisk/messages for the reason, or better yet, from the cli load the module manually and see the error in real time. If I had to guess I would say it is a configuration error. Thank you and have a nice day, Anthony Francis From: [email protected] [mailto:[email protected]] On Behalf Of Eric Merkel (Mail Lists) Sent: Thursday, January 21, 2010 1:41 PM To: [email protected] Subject: [asterisk-users] pri CLI command not available I am in the process of trying to terminate a PRI into a new * server. The server has an old T100P T1/PRI card in it. I have compiled the following on Centos 5.4. dahdi-linux-complete-2.2.1+2.2.1 libpri-1.4.10.2 asterisk-1.4.29 Everything seems to have compiled fine. DAHDI reports "Found a Wildcard: Digium Wildcard T100P T1/PRI" on bootup. Dahdi_tool shows that the span is up and active with no alarms however the phone company is not seeing the trunkgroup going into service. I was wanting to take a look at the PRI debugs but for some reason the CLI "pri" option is not available. I libpri compiled without any issues prior to compiling asterisk. What would cause the "pri debug" commands to not be available in the CLI? ===== Eric Merkel [email protected]
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
