On Tue, Jun 22, 2010 at 12:26:28PM +0100, A J Stiles wrote:
> Is anybody else using the following combination:
>
> * a TE410P card (wct4xxp driver)
> * a BT ISDN connection
> * DAHDI 2.3.0.1
> * Asterisk 1.6.2.9
>
> I'm trying to configure a new box to replace a legacy system (same hardware;
> some old version of Asterisk with Zaptel; works lovely but hopelessly
> out-of-date) and not having much joy. Specifically, I couldn't get it to
> see a D-channel on channel 16 of span 1. And without a D-channel, there is
> no way I'm going to be able to get a call in or out.
>
> This could well be because the syntax of modern /etc/dahdi/system.conf
> and /etc/asterisk/chan_dahdi.conf is slightly incompatible with the old
> zapata.conf and zaptel.conf files.
The old ones should work just as well. Apart from 'echocanceller' lines
in system.conf. Those may prevent you from having a working echo
canceller, but nothing worse.
What do you have in those files?
What's the output of lsdahdi ?
--
Tzafrir Cohen
icq#16849755 jabber:[email protected]
+972-50-7952406 mailto:[email protected]
http://www.xorcom.com iax:[email protected]/tzafrir
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
