On 6/22/2010 4:26 AM, A J Stiles wrote: > Is anybody else using the following combination: > > * a TE410P card (wct4xxp driver) > * a BT ISDN connection > * DAHDI 2.3.0.1 > * Asterisk 1.6.2.9 > > I'm trying to configure a new box to replace a legacy system (same hardware; > some old version of Asterisk with Zaptel; works lovely but hopelessly > out-of-date) and not having much joy. Specifically, I couldn't get it to > see a D-channel on channel 16 of span 1. And without a D-channel, there is > no way I'm going to be able to get a call in or out. > > This could well be because the syntax of modern /etc/dahdi/system.conf > and /etc/asterisk/chan_dahdi.conf is slightly incompatible with the old > zapata.conf and zaptel.conf files. > > So I guess the first question should be, has anybody else managed to make this > combination work? > > (I'm new here and I may have missed some important information, so please > ask.) > > Hi- I've been going through the same upgrade process recently, and had the same error (shown in your other message). I had forgotten that the equipment I was plugged in to was CPE, so I had to change my new setting for that span to "NET" rather than CPE. I notice in your old zapata files that you had CPE for two spans and NET for the other two, and your dahdi_chan setup is set up the same. But I'm thinking perhaps during testing you plugged a CPE on your new setup to a CPE on the other, which would produce the symptoms you see.
-Scott -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users