Hi Robert I took it from CVS, and it compiles nicely (after a little help from the group here).
My PC has a sound card in it, which works for other applications. I've managed to get rid of the sound error by turning the 'idle timeout' on the sound server off, after noticing that playing a track in XMMS seemed to stop the Asterisk error. My SIP phone is located on my server at the office, and my Asterisk server is at home - both behind NAT'd firewalls. As you suggested, I have taken the sample config and will try and experiment a little from here. Regards Mike > Mike, > Are you using the 0.7.1 tar distribution or CVS? I was able to compile > the 0.7.1 Asterisk program/sample config's to get a working system on a PC > with no sound device and no phone interfaces. This system is about as > simple as it can get (except for the 3 fixed disks in it) and is even a > low end Pentium I (100 Mhz, 32MB RAM). > > My suggestions are: > > - delete the source directory (including /etc/asterisk) and rebuild > Asterisk (make install) and the sample config. (instructions on screen > after the Asterisk build). > > - try to start Asterisk with NO changes to the config files. If it > doesn't start then the problem is probably with your system hardware. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
