Darren, On Tue, 27 Jan 2004, Darren McIntosh wrote:
> Do you have country=au set in indications.conf? A reload brings the > indications.conf changes in for me. Yes, I do. The cadences of all the tones are correct, which tells me that at least part of it is working. The frequencies of the tones, however, seem to be in ignorance of the values I set. Again, this only applies to the tones generated by the simple switch; if I use Playtones(), they are correct. Do I need to specify country=au in zaptel.conf or zapata.conf as well? Here's what I have: zaptel.conf >>>> # zaptel.conf loadzone=au defaultzone=au fxsks=1 fxoks=2 fxoks=3 <<<< zapata.conf >>>> ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; language=au ; ; Default context ; context=default ; ; Switchtype: Only used for PRI. ; switchtype=national ; rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.5 txgain=0.5 group=1 callgroup=1 pickupgroup=1 musiconhold=default ; ; ; Each channel consists of the channel number or range. It ; inherits the parameters that were specified above its declaration ; signalling=fxs_ks busydetect=yes callerid=asreceived channel => 1 ; Channels on the FXS card signalling=fxo_ks callerid="Test handset 1" <221> context=international channel => 2 callerid="Test handset 2" <222> context=local channel => 3 <<<< Thanks, Vic Cross _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
