Hi,
On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18,
I inserted a new Digium HA8 + B400M card.
My usual installation fails.
I can see it listed :
# lspci -n | grep d161
01:0b.0 0200: d161:8007 (rev 11)
# lspci -vn
01:0b.0 0200: d161:8007 (rev 11)
Subsystem: d161:8007
Flags: medium devsel, IRQ 22
I/O ports at d400 [size=256]
Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 20020000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Kernel modules: wctdm24xxp
# lsdahdi
# modprobe wctdm24xxp
# dahdi_genconf -v modules
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/modules
# cat modules
# Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on
Fri Nov 26 12:02:11 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
wctdm24xxp
# dahdi_genconf -v system
Default parameters from /etc/dahdi/genconf_parameters
Empty configuration -- no spans
Generating /etc/dahdi/system.conf
Is there something I could do to change this ?
Regards
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
