2010/11/29 Shaun Ruffell <[email protected]> > > > Does the "modprobe wctdm24xxp" command complete successfully?
Is there > anything in dmesg or in the output of dahdi_scan after loading the driver? > > Cheers, > Shaun > Hi, Here is relevant dmesg's output : [ 13.455729] dahdi: Telephony Interface Registered on major 196 [ 13.455729] dahdi: Version: 2.4.0 [ 13.510847] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.527788] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 17.527787] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 19.527787] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 21.527785] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 23.527784] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 25.527785] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 27.527785] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 29.527785] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 31.527785] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 33.527942] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 33.527995] wctdm24xxp 0000:01:0b.0: The firmware may be corrupted. Please completely power off your system, power on, and then reload th e driver with the 'forceload' module parameter set to 1 to attempt recovery. [ 33.544741] ACPI: PCI interrupt for device 0000:01:0b.0 disabled [ 33.544757] wctdm24xxp: probe of 0000:01:0b.0 failed with error -5 [ 34.157817] dahdi: Registered tone zone 2 (France) [ 38.873158] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 47.462040] dahdi: Detected time shift. My setup is : Asterisk box with HA8+B400M <---ISDN/BRI----> Patton SN4638 <----SIP---> Asterisk Patton SN4638 is configured to behave as telco node (ie NT/PtmP). PS: As a side note, I originally included the "modprobe wctdm24xxp" command in a shell script configured with "set -e" option. I will further check the modprobe exit code when such " wctdm24xxp: probe of 0000:01:0b.0 failed with error -5" is produced. Regards
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
