Thanks all for ur participation and kindly advise.
As I noticed that jitterbuffer could help if the ping does not have request
time out but the voice is also cutting .. but in that case, I have to set the
jitterbuffer at the IP Phones and Asterisk boxes.
I have a polycom phone for example, and to set the jitterbuffer there are the
following paramters:
Payload Size
Jitter Buffer Minimum
Jitter Buffer Shrink
Jitter Buffer Maximum
When it use the minimum, and when it use the Shrink and when it use the maximum?
If to look at the asterisk (in the SIP or IAX files) then there are a paramters
for the jitterbuffer also, but really I am not able to know when to use this
and when to use this:
jenable, jbforce, jbmaxsize, jbresyncthreashold, jbimpl, jblog
How to use the jbresyncthreashold? In which case?
Regarding to the QoS, which will be need in case having a packet loose, correct?
I just need to ask about something:
What I will be able to do if my ISP did not setup the QoS at his side? What
kind of settings I can do in my DSL router (in case of Cisco, or in case of
Linksys that running linux firmware)?
>From the other side, if I used linux server to set the QoS, so do I have to
>let all the network elements to pass this linux server (so it will be the
>default gateway for other elements)?
Appreciate the kindly help.
Regards
Bilal
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
