On 12/2/10 4:53 PM, Danny Nicholas wrote: >> Could you update to the lastest version of DAHDI-linux and try: >> ]# modprobe wctdm24xxp debug=1 >> >> and give me the dmesg output? >> >> I think the IO registers being in use is a side effect of a previous >> failed load. I just committed 9503 [1] to bypass that check. >> >> [1] http://svn.asterisk.org/view/dahdi?view=revision&revision=9503 > > [77861.878126] No iBFT detected. > [77901.847781] wctdm24xxp 0000:13:00.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [77901.847796] wctdm24xxp 0000:13:00.0: IO Registers are in use by another > module. > [77901.847807] wctdm24xxp 0000:13:00.0: PCI INT A disabled > [77901.847816] wctdm24xxp: probe of 0000:13:00.0 failed with error -5 >
Are you sure you installed the new drivers? After the new drivers are loaded, what is the output of 'cat /sys/modules/dahdi/version' and 'cat /sys/modules/wctdm24xxp/parameters/debug' ? After a quick scan, I didn't see a code path where -EIO (which is the -5) would be returned from __voicebus_init without another corresponding message in the kernel log. -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
