-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Shaun Ruffell Sent: Thursday, December 02, 2010 7:13 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] DAHDI on VMWARE
On 12/2/10 6:47 PM, Shaun Ruffell wrote: > > On 12/2/10 4:53 PM, Danny Nicholas wrote: >>> Could you update to the lastest version of DAHDI-linux and try: >>> ]# modprobe wctdm24xxp debug=1 >>> >>> and give me the dmesg output? >>> >>> I think the IO registers being in use is a side effect of a previous >>> failed load. I just committed 9503 [1] to bypass that check. >>> >>> [1] http://svn.asterisk.org/view/dahdi?view=revision&revision=9503 >> >> [77861.878126] No iBFT detected. >> [77901.847781] wctdm24xxp 0000:13:00.0: PCI INT A -> GSI 16 (level, low) -> >> IRQ 16 >> [77901.847796] wctdm24xxp 0000:13:00.0: IO Registers are in use by another >> module. >> [77901.847807] wctdm24xxp 0000:13:00.0: PCI INT A disabled >> [77901.847816] wctdm24xxp: probe of 0000:13:00.0 failed with error -5 >> > > Are you sure you installed the new drivers? After the new drivers are > loaded, what is the output of 'cat /sys/modules/dahdi/version' and 'cat > /sys/modules/wctdm24xxp/parameters/debug' ? > > After a quick scan, I didn't see a code path where -EIO (which is the > -5) would be returned from __voicebus_init without another corresponding > message in the kernel log. > Actually I think I wasn't clear. Instead of the "latest version of DAHDI-linux" I think I should have said "to the current trunk of dahdi-linux" i.e. ]# svn co http://svn.asterisk.org/svn/dahdi/linux/trunk dahdi-linux-trunk ]# cd dahdi-linux-trunk ]# make install ]# /etc/init.d/dahdi stop ]# dmesg -c > /dev/null ]# modprobe wctdm24xxp debug=1 ]# dmesg | tee output.txt The results of output.txt is what I am interested in. Thanks, Shaun Output.txt [226640.316796] dahdi: Telephony Interface Registered on major 196 [226640.316797] dahdi: Version: SVN-trunk-r9503 [226640.321586] wctdm24xxp 0000:13:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [226640.321604] wctdm24xxp 0000:13:00.0: IO Registers are in use by another module. [226640.421189] wctdm24xxp 0000:13:00.0: Did not come out of reset within 100ms [226640.421191] wctdm24xxp 0000:13:00.0: Failed reset. [226640.421222] wctdm24xxp 0000:13:00.0: PCI INT A disabled [226640.421227] wctdm24xxp: probe of 0000:13:00.0 failed with error -5 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
