Your welcome !
AB2L
+33 (0)367100783
[email protected]
Le 14/02/2011 13:08, Albert a écrit :
Sebastian,
It seems it's working now!
Cable was fine, thought i have added crc4 to span config:
span=1,1,0,ccs,hdb3,crc4
....
Thank you very much for your help and hints! :)
oice:/etc/dahdi# dahdi_scan
[1]
active=yes
alarms=OK
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
location=Board ID Switch 0
basechan=1
totchans=31
irq=16
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
On 14.02.2011 12:29, Albert wrote:voice:/etc/dahdi# cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
1 TE2/0/1/1 Clear (SWEC: MG2)
2 TE2/0/1/2 Clear (SWEC: MG2)
3 TE2/0/1/3 Clear (SWEC: MG2)
4 TE2/0/1/4 Clear (SWEC: MG2)
5 TE2/0/1/5 Clear (SWEC: MG2)
6 TE2/0/1/6 Clear (SWEC: MG2)
7 TE2/0/1/7 Clear (SWEC: MG2)
8 TE2/0/1/8 Clear (SWEC: MG2)
9 TE2/0/1/9 Clear (SWEC: MG2)
10 TE2/0/1/10 Clear (SWEC: MG2)
11 TE2/0/1/11 Clear (SWEC: MG2)
12 TE2/0/1/12 Clear (SWEC: MG2)
13 TE2/0/1/13 Clear (SWEC: MG2)
14 TE2/0/1/14 Clear (SWEC: MG2)
15 TE2/0/1/15 Clear (SWEC: MG2)
16 TE2/0/1/16 HDLCFCS
17 TE2/0/1/17 Clear (SWEC: MG2)
18 TE2/0/1/18 Clear (SWEC: MG2)
19 TE2/0/1/19 Clear (SWEC: MG2)
20 TE2/0/1/20 Clear (SWEC: MG2)
21 TE2/0/1/21 Clear (SWEC: MG2)
22 TE2/0/1/22 Clear (SWEC: MG2)
23 TE2/0/1/23 Clear (SWEC: MG2)
24 TE2/0/1/24 Clear (SWEC: MG2)
25 TE2/0/1/25 Clear (SWEC: MG2)
26 TE2/0/1/26 Clear (SWEC: MG2)
27 TE2/0/1/27 Clear (SWEC: MG2)
28 TE2/0/1/28 Clear (SWEC: MG2)
29 TE2/0/1/29 Clear (SWEC: MG2)
30 TE2/0/1/30 Clear (SWEC: MG2)
31 TE2/0/1/31 Clear (SWEC: MG2)
On 14.02.2011 12:17, Sébastien BERGER wrote:
As I know it's only telco who provide the clock. Then you must configure
your span with 1,1,0
1 is as TE (terminal equipment)
0 is as NT (network termination)
So, configure your span as TE, be sure telco not use crc4.
If already yellow, call your telco and ask him if he provide clock or not.
This is what i am doing now, span in configured to obtain timiing from
telco. (span=1,1,0,ccs,hdb3)
Just to be sure, verify your E1 cable. It's a crossover ?
It's out remote location so i dont have direct connection. But thanks
for hint, i will also check on that.
Regards,
Sebastien BERGER
AB2L
+33 (0)367100783
[email protected]
Le 14/02/2011 11:50, Albert a écrit :
Hi,
span 1 - e1 line (15 channels)
span 2 - nothing is connected to 2nd span
below is also status from proc fs
ps. i was also trying with timing provided by card (0)
span=1,1,0,ccs,hdb3
...
but result was the same
voice:/tmp# cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW
1 TE2/0/1/1 Clear YELLOW(SWEC: MG2)
2 TE2/0/1/2 Clear YELLOW(SWEC: MG2)
3 TE2/0/1/3 Clear YELLOW(SWEC: MG2)
4 TE2/0/1/4 Clear YELLOW(SWEC: MG2)
5 TE2/0/1/5 Clear YELLOW(SWEC: MG2)
6 TE2/0/1/6 Clear YELLOW(SWEC: MG2)
7 TE2/0/1/7 Clear YELLOW(SWEC: MG2)
8 TE2/0/1/8 Clear YELLOW(SWEC: MG2)
9 TE2/0/1/9 Clear YELLOW(SWEC: MG2)
10 TE2/0/1/10 Clear YELLOW(SWEC: MG2)
11 TE2/0/1/11 Clear YELLOW(SWEC: MG2)
12 TE2/0/1/12 Clear YELLOW(SWEC: MG2)
13 TE2/0/1/13 Clear YELLOW(SWEC: MG2)
14 TE2/0/1/14 Clear YELLOW(SWEC: MG2)
15 TE2/0/1/15 Clear YELLOW(SWEC: MG2)
16 TE2/0/1/16 HDLCFCS YELLOW
17 TE2/0/1/17 Clear YELLOW(SWEC: MG2)
18 TE2/0/1/18 Clear YELLOW(SWEC: MG2)
19 TE2/0/1/19 Clear YELLOW(SWEC: MG2)
20 TE2/0/1/20 Clear YELLOW(SWEC: MG2)
21 TE2/0/1/21 Clear YELLOW(SWEC: MG2)
22 TE2/0/1/22 Clear YELLOW(SWEC: MG2)
23 TE2/0/1/23 Clear YELLOW(SWEC: MG2)
24 TE2/0/1/24 Clear YELLOW(SWEC: MG2)
25 TE2/0/1/25 Clear YELLOW(SWEC: MG2)
26 TE2/0/1/26 Clear YELLOW(SWEC: MG2)
27 TE2/0/1/27 Clear YELLOW(SWEC: MG2)
28 TE2/0/1/28 Clear YELLOW(SWEC: MG2)
29 TE2/0/1/29 Clear YELLOW(SWEC: MG2)
30 TE2/0/1/30 Clear YELLOW(SWEC: MG2)
31 TE2/0/1/31 Clear YELLOW(SWEC: MG2)
voice:/tmp# cat /proc/dahdi/2
Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS RED
32 TE2/0/2/1 Clear RED(SWEC: MG2)
33 TE2/0/2/2 Clear RED(SWEC: MG2)
34 TE2/0/2/3 Clear RED(SWEC: MG2)
35 TE2/0/2/4 Clear RED(SWEC: MG2)
36 TE2/0/2/5 Clear RED(SWEC: MG2)
37 TE2/0/2/6 Clear RED(SWEC: MG2)
38 TE2/0/2/7 Clear RED(SWEC: MG2)
39 TE2/0/2/8 Clear RED(SWEC: MG2)
40 TE2/0/2/9 Clear RED(SWEC: MG2)
41 TE2/0/2/10 Clear RED(SWEC: MG2)
42 TE2/0/2/11 Clear RED(SWEC: MG2)
43 TE2/0/2/12 Clear RED(SWEC: MG2)
44 TE2/0/2/13 Clear RED(SWEC: MG2)
45 TE2/0/2/14 Clear RED(SWEC: MG2)
46 TE2/0/2/15 Clear RED(SWEC: MG2)
47 TE2/0/2/16 HDLCFCS RED
48 TE2/0/2/17 Clear RED(SWEC: MG2)
49 TE2/0/2/18 Clear RED(SWEC: MG2)
50 TE2/0/2/19 Clear RED(SWEC: MG2)
51 TE2/0/2/20 Clear RED(SWEC: MG2)
52 TE2/0/2/21 Clear RED(SWEC: MG2)
53 TE2/0/2/22 Clear RED(SWEC: MG2)
54 TE2/0/2/23 Clear RED(SWEC: MG2)
55 TE2/0/2/24 Clear RED(SWEC: MG2)
56 TE2/0/2/25 Clear RED(SWEC: MG2)
57 TE2/0/2/26 Clear RED(SWEC: MG2)
58 TE2/0/2/27 Clear RED(SWEC: MG2)
59 TE2/0/2/28 Clear RED(SWEC: MG2)
60 TE2/0/2/29 Clear RED(SWEC: MG2)
61 TE2/0/2/30 Clear RED(SWEC: MG2)
62 TE2/0/2/31 Clear RED(SWEC: MG2)
Albert
On 14.02.2011 11:39, Sébastien BERGER wrote:
Hello,
Can you say us what is connected in which span ?
span 1 =
span 2 =
Yellow would say that the span did not receive external clock
Sebastien
AB2L
+33 (0)367100783
[email protected]
Le 14/02/2011 11:34, Albert a écrit :
Hi guys,
I am getting YELLOW alarm on my span with E1 line. Anyone knows what
could be the problem ? Below is my config and status...
voice:/etc/dahdi# dahdi_hardware -v
pci:0000:02:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
voice:/etc/dahdi# dahdi_scan
[1]
active=yes
alarms=YEL
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
location=Board ID Switch 0
basechan=1
totchans=31
irq=16
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
[2]
<cut> ....</cut>
voice:/etc/dahdi# cat system.conf
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
# span=2,0,0,ccs,hdb3,crc4,yellow
span=2,0,0,ccs,hdb3
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
# Global data
loadzone = uk
defaultzone = uk
ps1. I am using DAHDI drivers in version 2.4.0
ps2. in attachment screen from dahdi_tool
Any help will do.
Thanks,
Alebert
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
