dmesg: wct4xxp 0000:0a:03.0: SPAN 9: Primary Sync Source wct4xxp 0000:0a:03.0: Span 2 configured for ESF/B8ZS wct4xxp 0000:0a:03.0: SPAN 10: Primary Sync Source wct4xxp 0000:0a:03.0: All spans in alarm : No validspan to source RCLK from wct4xxp 0000:0a:03.0: RCLK source set to span 1 wct4xxp 0000:0a:03.0: Span 3 configured for ESF/B8ZS wct4xxp 0000:0a:03.0: SPAN 11: Primary Sync Source wct4xxp 0000:0a:03.0: Span 4 configured for ESF/B8ZS wct4xxp 0000:0a:03.0: SPAN 12: Primary Sync Source wct4xxp 0000:0a:03.0: All spans in alarm : No validspan to source RCLK from wct4xxp 0000:0a:03.0: RCLK source set to span 1
system.conf span=1,1,0,esf,b8zs bchan=2-24 mtp2=1 span=2,1,0,esf,b8zs bchan=26-48 mtp2=25 span=3,1,0,esf,b8zs bchan=49-72 span=4,1,0,esf,b8zs bchan=73-96 span=5,1,0,esf,b8zs bchan=97-120 span=6,1,0,esf,b8zs bchan=121-144 span=7,1,0,esf,b8zs bchan=145-168 span=8,1,0,esf,b8zs bchan=169-192 span=9,1,0,esf,b8zs bchan=193-216 span=10,1,0,esf,b8zs bchan=217-240 span=11,1,0,esf,b8zs bchan=241-264 span=12,1,0,esf,b8zs bchan=265-288 Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Shaun Ruffell Sent: Tuesday, August 02, 2011 10:34 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TE410P hardware problems On Tue, Aug 02, 2011 at 09:22:46PM -0400, Dave George wrote: > TE410P card down. > > I have three (3) TE410P in one machine running asterisk with SS7. > > My problems started last week when one of my cards started switching > to E1 every time after reboot. I set the following in dahdi.conf and > that solve the problem. > > /etc/modprobe.d/ > options wct4xxp t1e1override=0x00 > > Now all 4 ports on that card is down with Red Alarm. I tried > rebooting the machine and restarting dahdi with no luck. The other > two cards are working fine. I put a loop plug the ports and same problem. Any strange output in dmesg? Best guess is either the card has failed or it has started to unseat from it's PCI slot. Normally when it starts to unseat you'll see "Version Synchronization Errors" in dmesg when trying to load the card. -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
