I opened the jumpers on the card putting them in T1 mode and it worked. I had them set to T1 using the options in the dahdi.conf file under /etc/modprobe.d/
That worked well for over a year until it started acting up. Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Eric Wieling Sent: Tuesday, August 02, 2011 11:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TE410P hardware problems If it doesn't go green when you put a hard loopback on the port, then contact Digium support. > -----Original Message----- > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Dave George > Sent: Tuesday, August 02, 2011 10:52 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: Re: [asterisk-users] TE410P hardware problems > > dmesg: > > wct4xxp 0000:0a:03.0: SPAN 9: Primary Sync Source wct4xxp > 0000:0a:03.0: Span 2 configured for ESF/B8ZS wct4xxp 0000:0a:03.0: > SPAN 10: Primary Sync Source wct4xxp 0000:0a:03.0: All spans in alarm > : No validspan to source RCLK from wct4xxp 0000:0a:03.0: RCLK source > set to span 1 wct4xxp 0000:0a:03.0: Span 3 configured for ESF/B8ZS > wct4xxp 0000:0a:03.0: SPAN 11: Primary Sync Source wct4xxp > 0000:0a:03.0: Span 4 configured for ESF/B8ZS wct4xxp 0000:0a:03.0: > SPAN 12: Primary Sync Source wct4xxp 0000:0a:03.0: All spans in alarm > : No validspan to source RCLK from wct4xxp 0000:0a:03.0: RCLK source > set to span 1 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
