Hi try to add this
exten => _90ZXXXXXXXX,1,Set(CALLERPRES()=allowed) exten => _90ZXXXXXXXX,n,Set(CALLERID(num)=5631040) if you get the same result that is means that you don't have permission from your provider kind regards 2011/9/26 C F <[email protected]> > Confirm with your provider that allow you to set caller id on outbound. > > > On Sun, Sep 25, 2011 at 1:59 PM, bilal ghayyad <[email protected]> > wrote: > > Dear; > > > > By the way, the asterisk version is: 1.8.4.2 > > > > Yes I tried Set(CALLERID(num)=5631040) as shown in the below dialing, and > no success. Also I tried Set(CALLERID(num)=1040) and I tried > Set(CALLERID(num)=065631040) as the city code is 06 and when we call any > mobile, it is appearing 065631040, but all of this did not work. > > > > Do I have to use SetCallerPres? What is the value? > > > > The E1 is located in Jordan and it is PRI with 30 channels. Is there any > thing need to be set other than Set(CALLERID(num)? I am afraid that I have > to set a specific value for SetCallerPress ! > > > > Well, I have also a question: What should I set the callerid when I am > configuring the IP Phone in the sip.conf? > > > > By the way: what is the difference between using > Set(CALLERID(num)=5631040) and the callerid in the sip.conf? > > > > Kindly find below my dialing plan: > > > > exten => _90ZXXXXXXXX,1,Set(CALLERID(num)=5631040) > > exten => > _90ZXXXXXXXX,2,MixMonitor(${CHANNEL}${EXTEN:1}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)}.wav) > > exten => _90ZXXXXXXXX,3,Dial(${PSTNTRUNK}/${EXTEN:1}) > > exten => _90ZXXXXXXXX,4,Playback(vm-nobodyavail) > > exten => _90ZXXXXXXXX,5,Hangup() > > exten => _90ZXXXXXXXX,104,Congestion() ; if no channel available > > exten => _90ZXXXXXXXX,105,Hangup() > > > > > > ----------------------- > > > > > >> > >> Set(CALLERID(num)=5631040) > >> add this before the Dial command. > >> > >> On Sat, Sep 24, 2011 at 4:03 PM, bilal ghayyad <[email protected]> > >> wrote: > >> > Hi All; > >> > > >> > The DID range that we took from the telecom starts > >> from 1030 and end by 1059, now whenever we place a call, the > >> destination see the number 5631030. I gave the phone > >> extension 1040, and when I call, still the destination see > >> the number is 5631030? > >> > > >> > Kindly find below the configuration of the extension > >> 1040, please what I have also to configure so when this > >> extension make a call, the destination see it 5631040? > >> > > >> > [1040] > >> > type=friend > >> > host= dynamic > >> > callerid=1040 > >> > disallow=all > >> > allow=alaw > >> > allow=ulaw > >> > allow=g729 > >> > context=External > >> > dtmfmode=auto > >> > nat=no > >> > qualify=no > >> > canreinvite=yes > >> > username=1040 > >> > secret=******* > >> > > >> > Regards > >> > Bilal > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > New to Asterisk? Join us for a live introductory webinar every Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
