Dears; Yes, I tried all what mentioned, and did not work ... So I am contacting the service provider.
Thanks a lot. Regards Bilal ------------------- > > Hi > > try to add this > > exten => _90ZXXXXXXXX,1,Set(CALLERPRES()=allowed) > exten => _90ZXXXXXXXX,n,Set(CALLERID(num)=5631040) > > if you get the same result that is means that you don't > have permission from > your provider > > > kind regards > > 2011/9/26 C F <shma...@gmail.com> > > > Confirm with your provider that allow you to set > caller id on outbound. > > > > > > On Sun, Sep 25, 2011 at 1:59 PM, bilal ghayyad <bilmar...@yahoo.com> > > wrote: > > > Dear; > > > > > > By the way, the asterisk version is: 1.8.4.2 > > > > > > Yes I tried Set(CALLERID(num)=5631040) as shown > in the below dialing, and > > no success. Also I tried Set(CALLERID(num)=1040) and I > tried > > Set(CALLERID(num)=065631040) as the city code is 06 > and when we call any > > mobile, it is appearing 065631040, but all of this did > not work. > > > > > > Do I have to use SetCallerPres? What is the > value? > > > > > > The E1 is located in Jordan and it is PRI with 30 > channels. Is there any > > thing need to be set other than Set(CALLERID(num)? I > am afraid that I have > > to set a specific value for SetCallerPress ! > > > > > > Well, I have also a question: What should I set > the callerid when I am > > configuring the IP Phone in the sip.conf? > > > > > > By the way: what is the difference between using > > Set(CALLERID(num)=5631040) and the callerid in the > sip.conf? > > > > > > Kindly find below my dialing plan: > > > > > > exten => > _90ZXXXXXXXX,1,Set(CALLERID(num)=5631040) > > > exten => > > > _90ZXXXXXXXX,2,MixMonitor(${CHANNEL}${EXTEN:1}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)}.wav) > > > exten => > _90ZXXXXXXXX,3,Dial(${PSTNTRUNK}/${EXTEN:1}) > > > exten => > _90ZXXXXXXXX,4,Playback(vm-nobodyavail) > > > exten => _90ZXXXXXXXX,5,Hangup() > > > exten => _90ZXXXXXXXX,104,Congestion() ; if no > channel available > > > exten => _90ZXXXXXXXX,105,Hangup() > > > > > > > > > ----------------------- > > > > > > > > >> > > >> Set(CALLERID(num)=5631040) > > >> add this before the Dial command. > > >> > > >> On Sat, Sep 24, 2011 at 4:03 PM, bilal > ghayyad <bilmar...@yahoo.com> > > >> wrote: > > >> > Hi All; > > >> > > > >> > The DID range that we took from the > telecom starts > > >> from 1030 and end by 1059, now whenever we > place a call, the > > >> destination see the number 5631030. I gave > the phone > > >> extension 1040, and when I call, still the > destination see > > >> the number is 5631030? > > >> > > > >> > Kindly find below the configuration of > the extension > > >> 1040, please what I have also to configure so > when this > > >> extension make a call, the destination see it > 5631040? > > >> > > > >> > [1040] > > >> > type=friend > > >> > host= dynamic > > >> > callerid=1040 > > >> > disallow=all > > >> > allow=alaw > > >> > allow=ulaw > > >> > allow=g729 > > >> > context=External > > >> > dtmfmode=auto > > >> > nat=no > > >> > qualify=no > > >> > canreinvite=yes > > >> > username=1040 > > >> > secret=******* > > >> > > > >> > Regards > > >> > Bilal -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users