Mike, *What version of zaptel are you running? * My Zaptel version is - zaptel-1.4.12.1
*What zaptel commands have you tried? * None of the zaptel commands are working on my CLI. Its like on CLI, none of the commands starting with zap are working. (When I give "zap+TAB key" nothing shows up) *Have you added any lines to zaptel.conf and zapata.conf? * I am working on a backup server of an already running PBX. In zapata.conf, the only configurations that are there is as below. But I guess those configurations are that of an E1 card and I will have configure it from start. group=1 switchtype=euroisdn signalling=pri_cpe callerid=asreceived usecallerid=yes cidsignalling=dtmf cidstart=ring context=TEST_EXTERNAL channel=>1-15 channel=>17-31 *Who is your Telco provider and what signalling are they using on the T1? * I am not sure about the signalling they are using. And thanks for the tip on IRQ. As I said I am working on a remote server. I will ask some one over there to change the IRQ value. Regards, Najim On Fri, Sep 30, 2011 at 4:05 AM, Mike Beirne <[email protected]> wrote: > On 9/29/2011 2:52 PM, NaJIm wrote: > > IRQ misses: 2 > > You are risking lots of audio problems if the card shares the IRQ with > any other device. Try and go in the BIOS and disable the other device or > change the IRQ it is using so that they do not conflict. > > What version of zaptel are you running? > > What zaptel commands have you tried? > > Have you added any lines to zaptel.conf and zapata.conf? > > Who is your Telco provider and what signalling are they using on the T1? > > It looks like there is a control channel on 24, but 16 isn't showing the > same status as I would expect. > > Mike > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
