On 11/11/2011 07:38 PM, Eric Wieling wrote:
Show us /etc/asterisk/chan_dahdi.conf (and any #include'd files)
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of sean darcy
Sent: Friday, November 11, 2011 5:51 PM
To: [email protected]
Subject: [asterisk-users] 10.0.0-rc1: dahdi doesn't see card
From asterisk -cvvvvv
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/users.conf': == Found
-- Automatically generated pseudo channel
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
Ignoring any changes to 'userbase' (on reload) at line 23.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
Ignoring any changes to 'vmsecret' (on reload) at line 31.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
Ignoring any changes to 'hassip' (on reload) at line 35.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
Ignoring any changes to 'hasiax' (on reload) at line 39.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
Ignoring any changes to 'hasmanager' (on reload) at line 47.
== Registered channel type 'DAHDI' (DAHDI Telephony Driver)
== Manager registered action DAHDITransfer
== Manager registered action DAHDIHangup
== Manager registered action DAHDIDialOffhook
== Manager registered action DAHDIDNDon
== Manager registered action DAHDIDNDoff
== Manager registered action DAHDIShowChannels
== Manager registered action DAHDIRestart
chan_dahdi.so => (DAHDI Telephony Driver)
......
But, no dahdi.
dahdi show channels shows nothing:
Chan Extension Context Language MOH Interpret
Blocked State Description
pseudo default default
In Service
dahdi_cfg -vvv
DAHDI Tools Version - 2.4.1
DAHDI Version: 2.5.0.1
Echo Canceller(s): HWEC, OSLEC
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 04)
3 channels to configure.
Setting echocan for channel 1 to oslec
Setting echocan for channel 2 to oslec
Setting echocan for channel 4 to oslec
From dmesg:
dahdi: Telephony Interface Registered on major 196
[ 9.849036] dahdi: Version: 2.5.0.1
[ 9.899531] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 9.899919] wctdm 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19
(level, low) -> IRQ 19
[ 9.901845] Freshmaker version: 73
[ 9.902565] Freshmaker passed register test
[ 11.287170] Module 0: Installed -- AUTO FXS/DPO
[ 12.172362] Module 1: Installed -- AUTO FXS/DPO
[ 12.172795] Module 2: Not installed
[ 12.373273] Module 3: Installed -- AUTO FXO (FCC mode)
[ 12.374071] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules)
Any help appreciated.
sean
Thanks. That was it. The new install of 10.0.0 had overwritten
chan_dahdi.conf with the sample. Reloading the old chan_dahdi.conf got
it all to work.
What's puzzling is how dahdi_config knew how to configure the card
without chan_dahdi.conf. I'd just assumed it had read chan_dahdi.conf.
Live and learn.
sean
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
