I don't understand.
"Home_server" is registered to "clinic_server"

syscon7*CLI> iax2 show peers
Name/Username Host Mask Port Status clinic_server (null) (D) 255.255.255.255 0 Unmonitored
teliax           8.14.120.23     (S)  255.255.255.255  4569          OK (78 ms)
iaxy-322/iaxy-3  10.0.0.108      (D)  255.255.255.255  4569          Unmonitored

and even though the "Host" shows no IP_address, when I ring extension on the remote host 
"clinic-server" that phone is ringing on the remote asterisk.
Remote server "clinic-server" does not show any IP_address under "Host" (iax2 show peers) 
but when somebody call "home-server" extension my phone is ringing.
So this way it works. But why there is no "IP_address" under "Host" I DON'T know.
How to run "register" from a command line?

The only way it is not working working when I call from "Home_server" to "clinic-server" 
and back to "Home_server"

--
Joseph

On 04/15/12 12:46, Eric Wieling wrote:
As long as Host does not contain the peer's IP address in iax2 show peers then 
it is not going to work and is not registered.

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Joseph
Sent: Sunday, April 15, 2012 12:40 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 
- Unknown)

I think that part is working correctly I see boths asterisk are connected

on "home_server":
syscon7*CLI> iax2 show registry
Host                  dnsmgr  Username    Perceived             Refresh  State
192.168.141.1:4569    N       home_serve  192.168.141.8:4569         60  
Registered

syscon7*CLI> iax2 show peers
Name/Username    Host                 Mask             Port          Status
clinic_server    (null)          (D)  255.255.255.255  0             Unmonitored


on "clinic_server":
clinic-amd*CLI> iax2 show peers
Name/Username    Host                 Mask             Port          Status
home_server      (null)          (D)  255.255.255.255  0             Unmonitored

--
Joseph

On 04/15/12 09:38, Alejandro Imass wrote:
On Sat, Apr 14, 2012 at 7:55 PM, Joseph <[email protected]> wrote:
I forgot to add:

clinic-amd*CLI> iax2 show peers
Name/Username    Host                 Mask             Port          
Status
   home_server      (null)          (D)  255.255.255.255  0
Unmonitored
iaxy-322/iaxy-3  (null)          (D)  255.255.255.255  0 Unmonitored

The two Asterisk boxes have to register to each other so home server
and clinic have to be on the peers list on both sides (or at min on one
side) and you must see the IP. Make sure you are resolving the names
correctly and that Asterisk is set-up to resolv DNS names or use the IP
instead.


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to 
Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

--
Joseph

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to