Hi Khalid,
my setup is almost identical
except for
loadzone = be
defaultzone = be
(obviously)
and in
chan_dahdi.conf:
[isdn4]
signaling = bri_cpe_ptmp
switchtype = euroisdn
group = 2
context = isdn
dahdichan = 10,11
this results into:
ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI Span: 4 Unable to
receive TEI from network in state 2(Assign awaiting TEI)!
and after trying to call:
May 9 21:25:51] NOTICE[1021]: chan_dahdi.c:3136
my_handle_dchan_exception: PRI got event: Alarm (4) on D-channel of span 4
[May 9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms:
Detected alarm on channel 10: Red Alarm
[May 9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms:
Detected alarm on channel 11: Red Alarm
[May 9 21:25:53] ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI
Span: 4 Unable to receive TEI from network in state 3(Establish awaiting
TEI)!
[May 9 21:25:53] NOTICE[1021]: chan_dahdi.c:3136
my_handle_dchan_exception: PRI got event: No more alarm (5) on D-channel
of span 4
[May 9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms:
Alarm cleared on channel 10
[May 9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms:
Alarm cleared on channel 11
An old Asterisk 1.4 installation with mISDN connected to the same line
used ptp, not ptmp. When I used bri_cpe_ptp, I get even more problems on
the console however (every second).
This is why I wondered if DAHDI is supposed to work over here,
cheers,
BC
On 05/09/12 21:14, khalid touati wrote:
Hi Bart,
here is a working configuration in Netherlands:
/etc/dahdi/system.conf:
span = 1,1,0,ccs,ami
bchan = 1,2
hardhdlc = 3
span = 2,1,0,ccs,ami
bchan = 4,5
hardhdlc = 6
span = 3,1,0,ccs,ami
bchan = 7,8
hardhdlc = 9
span = 4,1,0,ccs,ami
bchan = 10,11
hardhdlc = 12
loadzone = nl
defaultzone = nl (of course change those to your country initials)
/etc/asterisk/chan_dahdi.conf:
group = 1
signalling = bri_cpe_ptmp
switchtype = euroisdn
context = mainmenu
echocancel = yes
channel => 1,2,4,5,7,8,10,11
I am not using dahdi-channels, hope it helps!
On Wed, May 9, 2012 at 1:59 PM, Bart Coninckx
<[email protected] <mailto:[email protected]>> wrote:
Hi,
I'm experiencing difficulties to get a B410P running with Asterisk
10.3.1 and DAHDI 2.6.1.
Am I supposed to use DAHDI for this card and ISDN BRI for my
country (Belgium)?
thx,
BC
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Khalid Touati
Network Administrator at Endosoft, LLC
CCNA
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
